Enhancing the performance of P3HT:ICBA based polymer solar cells using LiF as electron collecting buffer layer and UV-ozone treated MoO3 as hole collecting buffer layer
文献类型：期刊论文
| 作者 | Cheng, Fei1; Fang, Guojia1; Fan, Xi1,2; Huang, Huihui1; Zheng, Qiao1; Qin, Pingli1; Lei, Hongwei1; Li, Yongfang2 |
| 刊名 | SOLAR ENERGY MATERIALS AND SOLAR CELLS
 |
| 出版日期 | 2013-03-01 |
| 卷号 | 110页码:63-68 |
| 关键词 | Bhj Polymer Solar Cell Buffer Layer Moo3 Uv-ozone Lif |
| ISSN号 | 0927-0248 |
| DOI | 10.1016/j.solmat.2012.12.006 |
| 英文摘要 | Efficient bulk-heterojunction (BHJ) polymer solar cells (PSCs) based on poly (3-hexylthiophene) (P3HT): indene-C-60 bisadduct (ICBA) were fabricated with lithium fluoride (LiF) as electron collecting buffer layer and UV-ozone (UVO) treated molybdenum trioxide (MoO3) as hole collecting buffer layer. LiF is observed to be critical for the device performance, significantly enhancing the fill factor (FF) and the efficiency compared to the device without LiF layer. MoO3 layer is also critical to the device performance, efficiently extracting holes to prevent the exciton quenching and reducing the interfacial resistance because of alignment of energy band. After UVO treatment on MoO3 film, its surface morphology, transmittance and film quality can be improved, therefore, it is beneficial to the performance of the PSCs. The optimal thickness of MoO3 and UVO treatment time on MoO3 was 12 nm and 15 min, respectively. Based on these optimal parameters, a power conversion efficiency (PCE) of 6.43% was obtained under AM1.5G 100 mW/cm(2) illumination. (C) 2012 Elsevier B.V. All rights reserved. |
| 语种 | 英语 |
| WOS记录号 | WOS:000315360700009 |
| 出版者 | ELSEVIER SCIENCE BV |
| 源URL | [http://ir.iccas.ac.cn/handle/121111/42033]  |
| 专题 | 中国科学院化学研究所 |
| 通讯作者 | Fang, Guojia |
| 作者单位 | 1.Wuhan Univ, Sch Phys & Technol, Key Lab Artificial Micro & Nanostruct, Minist Educ China,Dept Elect Sci & Technol, Wuhan 430072, Peoples R China 2.Chinese Acad Sci, Inst Chem, CAS Key Lab Organ Solids, Beijing Natl Lab Mol Sci, Beijing 100190, Peoples R China |
| 推荐引用方式 GB/T 7714 | Cheng, Fei,Fang, Guojia,Fan, Xi,et al. Enhancing the performance of P3HT:ICBA based polymer solar cells using LiF as electron collecting buffer layer and UV-ozone treated MoO3 as hole collecting buffer layer[J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS,2013,110:63-68. |
| APA | Cheng, Fei.,Fang, Guojia.,Fan, Xi.,Huang, Huihui.,Zheng, Qiao.,...&Li, Yongfang.(2013).Enhancing the performance of P3HT:ICBA based polymer solar cells using LiF as electron collecting buffer layer and UV-ozone treated MoO3 as hole collecting buffer layer.SOLAR ENERGY MATERIALS AND SOLAR CELLS,110,63-68. |
| MLA | Cheng, Fei,et al."Enhancing the performance of P3HT:ICBA based polymer solar cells using LiF as electron collecting buffer layer and UV-ozone treated MoO3 as hole collecting buffer layer".SOLAR ENERGY MATERIALS AND SOLAR CELLS 110(2013):63-68. |
入库方式： OAI收割
来源：化学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。