Effect of initiator on photopolymerization of acidic, aqueous dental model adhesives
文献类型：期刊论文
| 作者 | Guo, Xinglin1,2; Peng, Zhonghua3; Spencer, Paulette4; Wang, Yong1 |
| 刊名 | JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
 |
| 出版日期 | 2009-09-15 |
| 卷号 | 90A期号:4页码:1120-1127 |
| 关键词 | Self-etching Adhesive Degree Of Conversion Photo-polymerization Rate Acidic And Hydrophilic Monomer Ftir |
| ISSN号 | 1549-3296 |
| DOI | 10.1002/jbm.a.32185 |
| 英文摘要 | This study evaluated different initiator systems in self-etching model adhesives, in which camphorquinone (CQ) or [3-(3,4-dimethyl-9-oxo-9H-thioxanthen-2-yloxy)-2-hydroxylpropy] trimethylammonium chloride (QTX) was employed as a photoinitiator (dye). N-phenylglycine (NPG), ethyl 4-dimethylaminobenzoate (4E) or 2-(dimethylamino) ethyl methacrylate (DMAEMA) was used as the coinitiator (CI). The role of diphenyliodonium hexafluorophosphate (DPIHP) in the polymerization process was also studied. The concentrations of dye, CI, and DPIHP in model adhesives were all maintained at 0.022 mmol per gram monomer. The model adhesive contained two monomers: (bis[2-(methacryloyloxy)ethyl] phosphate) (2MP) and 2-hydroxyethyl methacrylate (HEMA) whose mass ratio was 1:1, thus representing an acidic and hydrophilic formulation. The polymerization rate and the degree of conversion (DC) of the model adhesives with 5, 15, or 25% water content were determined using FTIR/ATR with a time-based spectrum analysis. The results indicated that with CQ as the photoinitiator, 4E appeared to be the most efficient CI, whereas the CQ-DMAEMA combination led to very low radical generation efficiency (DC < 5%). DPIHP exhibited little effect on the polymerization process. With QTX as the photoinitiator, however, DPIHP played an essential role. Without DPIHP, all three QTX-CI systems failed to initiate polymerization (DC < 5%). The QTX-DPIHP combination, on the other hand, was found to be a viable initiator system. The above results provide the critical information for the development of self-etching adhesive systems. (C) 2008 Wiley Periodicals, Inc. J Biomed Mater Res 90A: 1120-1127, 2009 |
| 语种 | 英语 |
| WOS记录号 | WOS:000268940100017 |
| 出版者 | WILEY-LISS |
| 源URL | [http://ir.iccas.ac.cn/handle/121111/67545]  |
| 专题 | 中国科学院化学研究所 |
| 通讯作者 | Wang, Yong |
| 作者单位 | 1.Univ Missouri, Sch Dent, Dept Oral Biol, Kansas City, MO 64108 USA 2.Chinese Acad Sci, Inst Chem, Beijing 100190, Peoples R China 3.Univ Missouri, Dept Chem, Kansas City, MO 64110 USA 4.Univ Kansas, Sch Engn, Bioengn Res Ctr, Lawrence, KS 66045 USA |
| 推荐引用方式 GB/T 7714 | Guo, Xinglin,Peng, Zhonghua,Spencer, Paulette,et al. Effect of initiator on photopolymerization of acidic, aqueous dental model adhesives[J]. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A,2009,90A(4):1120-1127. |
| APA | Guo, Xinglin,Peng, Zhonghua,Spencer, Paulette,&Wang, Yong.(2009).Effect of initiator on photopolymerization of acidic, aqueous dental model adhesives.JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A,90A(4),1120-1127. |
| MLA | Guo, Xinglin,et al."Effect of initiator on photopolymerization of acidic, aqueous dental model adhesives".JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A 90A.4(2009):1120-1127. |
入库方式： OAI收割
来源：化学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。