Polyamide single polymer composites prepared via in situ anionic polymerization of epsilon-caprolactam
文献类型：期刊论文
| 作者 | Gong, Ying2,3; Liu, Andong1; Yang, Guisheng1 |
| 刊名 | COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
 |
| 出版日期 | 2010-08-01 |
| 卷号 | 41期号:8页码:1006-1011 |
| 关键词 | Polymer Matrix Composite (Pmcs) Fiber/matrix Bond Mechanical Testing Resin Transfer Molding (Rtm) |
| ISSN号 | 1359-835X |
| DOI | 10.1016/j.compositesa.2010.04.006 |
| 英文摘要 | In order to prepare the polyamide single polymer composites (SPC(PA)) comprised of polyamide 6 (PA6) fiber and PA6 matrix, a novel method based on the in situ anionic polymerization of c-caprolactam was developed. The influence of a critical process parameter, molding temperature, on the structure of SPC(PA) was investigated by thermogravimetric analysis (TGA) and scanning electron microscope (SEM). Mechanical properties of SPC(PA) prepared at 140, 160, 180, and 200 degrees C were appraised by three-point bending and tensile test. An optimum molding temperature (160 degrees C) at which both the tensile and flexural strength reached a peak value was found in the studied molding temperature range. High reaction degree (>93%), low void fraction (<2.5%) and strong and stable fiber/matrix interface contributed to the obvious reinforcing effect of PA6 fibers on PA6 matrix. (C) 2010 Elsevier Ltd. All rights reserved. |
| 语种 | 英语 |
| WOS记录号 | WOS:000279097200010 |
| 出版者 | ELSEVIER SCI LTD |
| 源URL | [http://ir.iccas.ac.cn/handle/121111/69461]  |
| 专题 | 中国科学院化学研究所 |
| 通讯作者 | Yang, Guisheng |
| 作者单位 | 1.Shanghai Genius Adv Mat Co Ltd, Shanghai 201109, Peoples R China 2.Chinese Acad Sci, Inst Chem, CAS Key Lab Engn Plast, Joint Lab Polymer Sci & Mat, Beijing 100080, Peoples R China 3.Chinese Acad Sci, Grad Sch, Beijing 100039, Peoples R China |
| 推荐引用方式 GB/T 7714 | Gong, Ying,Liu, Andong,Yang, Guisheng. Polyamide single polymer composites prepared via in situ anionic polymerization of epsilon-caprolactam[J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING,2010,41(8):1006-1011. |
| APA | Gong, Ying,Liu, Andong,&Yang, Guisheng.(2010).Polyamide single polymer composites prepared via in situ anionic polymerization of epsilon-caprolactam.COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING,41(8),1006-1011. |
| MLA | Gong, Ying,et al."Polyamide single polymer composites prepared via in situ anionic polymerization of epsilon-caprolactam".COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING 41.8(2010):1006-1011. |
入库方式： OAI收割
来源：化学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。