Gold nanoparticle ink suitable for electric-conductive pattern fabrication using in ink-jet printing technology
文献类型：期刊论文
| 作者 | Cui, Wenjuan1; Lu, Wensheng1; Zhang, Yakun1; Lin, Guanhua1; Wei, Tianxin2; Jiang, Long1 |
| 刊名 | COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
 |
| 出版日期 | 2010-04-05 |
| 卷号 | 358期号:1-3页码:35-41 |
| 关键词 | Gold Nanoparticle Ink-jet Viscosity Pattern Microfabrication Conductivity |
| ISSN号 | 0927-7757 |
| DOI | 10.1016/j.colsurfa.2010.01.023 |
| 英文摘要 | In this paper we presented a novel water-based nanoparticle printing ink which can easily be used in producing electric-conductive patterns for the microfabrication and microelectronic devices by commercial printers. The well-dispersed nanoparticle ink was composed of metallic colloids which had a gold core less than 5 nm in diameter and were protected by two overlapped layers of polymers, poly(N-vinylpyrrolidone) (PVP) and acrylic resin (AR). The double layer protected gold nanoparticle (AuNP) ink was stable against aggregation for more than 1 year even at gold concentration higher than 20%. Viscosity of as-prepared ink was similar to the commercial inks which could be used in producing continuous and smooth lines 10 mu m in width and could be printed on various substrates. It has been found that the obtained gold patterns after sintered at 500 degrees C for 3 h would convert to electrical conductive ones. The density of metallic particles as well as the conductivity of patterns can be controlled by mediating the number of printing layers and the conditions of sintering process. A 50-layer printed line obtained in our experiment showed apparent conductivity of 8.0 x 10(4) S cm(-1) which was near to the conductivity value of the bulk gold metal. (C) 2010 Elsevier B.V. All rights reserved. |
| 语种 | 英语 |
| WOS记录号 | WOS:000276115100006 |
| 出版者 | ELSEVIER SCIENCE BV |
| 源URL | [http://ir.iccas.ac.cn/handle/121111/69943]  |
| 专题 | 中国科学院化学研究所 |
| 通讯作者 | Jiang, Long |
| 作者单位 | 1.Chinese Acad Sci, Inst Chem, Beijing Natl Lab Mol Sci, Beijing 100190, Peoples R China 2.Beijing Inst Technol, Inst Chem Phys, Beijing 100081, Peoples R China |
| 推荐引用方式 GB/T 7714 | Cui, Wenjuan,Lu, Wensheng,Zhang, Yakun,et al. Gold nanoparticle ink suitable for electric-conductive pattern fabrication using in ink-jet printing technology[J]. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS,2010,358(1-3):35-41. |
| APA | Cui, Wenjuan,Lu, Wensheng,Zhang, Yakun,Lin, Guanhua,Wei, Tianxin,&Jiang, Long.(2010).Gold nanoparticle ink suitable for electric-conductive pattern fabrication using in ink-jet printing technology.COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS,358(1-3),35-41. |
| MLA | Cui, Wenjuan,et al."Gold nanoparticle ink suitable for electric-conductive pattern fabrication using in ink-jet printing technology".COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS 358.1-3(2010):35-41. |
入库方式： OAI收割
来源：化学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。