Synthesis and Properties of Poly(butylene terephthalate)/Multiwalled Carbon Nanotube Nanocomposites Prepared by In Situ Polymerization and In Situ Compatibilization
文献类型：期刊论文
| 作者 | Wu, Fangjuan1,2; Yang, Guisheng1,3 |
| 刊名 | JOURNAL OF APPLIED POLYMER SCIENCE
 |
| 出版日期 | 2010-12-05 |
| 卷号 | 118期号:5页码:2929-2938 |
| 关键词 | Compatibilization Dispersions Ring-opening Polymerization |
| ISSN号 | 0021-8995 |
| DOI | 10.1002/app.32625 |
| 英文摘要 | A novel cyclic initiator was synthesized from dibutyl tin(IV) oxide and hydroxyl-functionalized multiwalled carbon nanotubes (MWNTs) and was used to initiate the ring-opening polymerization of cyclic butylene terephthalate oligomers to prepare poly(butylene terephthalate) (PBT)/MWNT nanocomposites. The results of Fourier transform infrared and NMR spectroscopy confirmed that a graft structure of PBT on the MWNTs was formed during the in situ polymerization; this structure acted as an in situ compatibilizer in the nanocomposites. The PBT covalently attached to the MWNT surface enhanced the interface adhesion between the MWNTs and PBT matrix and, thus, improved the compatibility. The morphologies of the nanocomposites were observed by field emission scanning electron microscopy and transmission electron microscopy, which showed that the nanotubes were homogeneously dispersed in the PBT matrix when the MWNT content was lower than 0.75 wt %. Differential scanning calorimetry and thermogravimetric analysis were used to investigate the thermal properties of the nanocomposites. The results indicate that the MWNTs acted as nucleation sites in the matrix, and the efficiency of nucleation was closely related to the dispersion of the MWNTs in the matrix. Additionally, the thermal stability of PBT was improved by the addition of the MWNTs. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 118: 2929-2938, 2010 |
| 语种 | 英语 |
| WOS记录号 | WOS:000282840900050 |
| 出版者 | JOHN WILEY & SONS INC |
| 源URL | [http://ir.iccas.ac.cn/handle/121111/71161]  |
| 专题 | 中国科学院化学研究所 |
| 通讯作者 | Yang, Guisheng |
| 作者单位 | 1.Chinese Acad Sci, Key Lab Engn Plast, Joint Lab Polymer Sci & Mat, Inst Chem, Beijing 100190, Peoples R China 2.Fujian Univ Technol, Dept Mat Sci & Engn, Fuzhou 350108, Peoples R China 3.Shanghai Genius Adv Mat Co Ltd, Shanghai 201109, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wu, Fangjuan,Yang, Guisheng. Synthesis and Properties of Poly(butylene terephthalate)/Multiwalled Carbon Nanotube Nanocomposites Prepared by In Situ Polymerization and In Situ Compatibilization[J]. JOURNAL OF APPLIED POLYMER SCIENCE,2010,118(5):2929-2938. |
| APA | Wu, Fangjuan,&Yang, Guisheng.(2010).Synthesis and Properties of Poly(butylene terephthalate)/Multiwalled Carbon Nanotube Nanocomposites Prepared by In Situ Polymerization and In Situ Compatibilization.JOURNAL OF APPLIED POLYMER SCIENCE,118(5),2929-2938. |
| MLA | Wu, Fangjuan,et al."Synthesis and Properties of Poly(butylene terephthalate)/Multiwalled Carbon Nanotube Nanocomposites Prepared by In Situ Polymerization and In Situ Compatibilization".JOURNAL OF APPLIED POLYMER SCIENCE 118.5(2010):2929-2938. |
入库方式： OAI收割
来源：化学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。