The Role of Ammonium Chloride in the Powder Thermal Diffusion Alloying Process on a Magnesium Alloy
文献类型：期刊论文
| 作者 | Lu, Dongzhu1,2,3; Jiang, Quantong1,2,3; Zheng, Meng1,2,3; Zhang, Jie1,2,3 ; Huang, Yanliang1,2,3; Hou, Baorong1,2,3
|
| 刊名 | COATINGS
 |
| 出版日期 | 2019-04-01 |
| 卷号 | 9期号:4页码:10 |
| ISSN号 | 2079-6412 |
| 关键词 | magnesium alloy ammonium chloride diffusion coating powder |
| DOI | 10.3390/coatings9040252 |
| 通讯作者 | Lu, Dongzhu(ldz@qdio.ac.cn) |
| 英文摘要 | The powder thermal diffusion alloying method could be utilized to fabricate Al-rich intermetallic coatings on magnesium alloys in the air. While the role of ammonium chloride powder in the diffusion alloying source is still to be investigated. This research took the AZ91D magnesium alloy as the substrate. Diffusion sources with various powders were utilized as the diffusion source. Microstructure observation and phase identification were enrolled to investigate the role of the ammonium chloride powder in the diffusion alloying process. Results indicate that HCl gas could turn some solid Al powder into gaseous AlCl3 to enhance the transport of active Al atoms, moreover, it reacts with the dense MgO film and converts it to a loose one, which enables the AlCl3 gas to penetrate MgO and arrive the matrix to form a protective coating. Furthermore, the ammonium chloride content should be confined to 10 wt. % of the diffusion alloying source. Too much ammonium chloride powder would result in a worse intermetallic coating. |
| 资助项目 | Applied Research Program of Qingdao[17-1-1-22-jch] ; Key Research & Development Program of Shandong Province[2018GSF117039] |
| WOS研究方向 | Materials Science |
| 语种 | 英语 |
| 出版者 | MDPI |
| WOS记录号 | WOS:000467318800039 |
| 源URL | [http://ir.qdio.ac.cn/handle/337002/161340]  |
| 专题 | 海洋研究所_海洋腐蚀与防护研究发展中心 |
| 通讯作者 | Lu, Dongzhu |
| 作者单位 | 1.Chinese Acad Sci, Inst Oceanol, CAS Key Lab Marine Environm Corros & Biofouling, Qingdao 266071, Shandong, Peoples R China 2.Pilot Natl Lab Marine Sci & Technol Qingdao, Open Studio Marine Corros & Protect, Qingdao 266237, Shandong, Peoples R China 3.Chinese Acad Sci, Ctr Ocean Mega Sci, Qingdao 266071, Shandong, Peoples R China |
| 推荐引用方式 GB/T 7714 | Lu, Dongzhu,Jiang, Quantong,Zheng, Meng,et al. The Role of Ammonium Chloride in the Powder Thermal Diffusion Alloying Process on a Magnesium Alloy[J]. COATINGS,2019,9(4):10. |
| APA | Lu, Dongzhu,Jiang, Quantong,Zheng, Meng,Zhang, Jie,Huang, Yanliang,&Hou, Baorong.(2019).The Role of Ammonium Chloride in the Powder Thermal Diffusion Alloying Process on a Magnesium Alloy.COATINGS,9(4),10. |
| MLA | Lu, Dongzhu,et al."The Role of Ammonium Chloride in the Powder Thermal Diffusion Alloying Process on a Magnesium Alloy".COATINGS 9.4(2019):10. |
入库方式： OAI收割
来源：海洋研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。