3D Mechanical Design and Stress Analysis of 20 T Common-Coil Dipole Magnet for SppC
文献类型：期刊论文
| 作者 | Wang, CT ; Wang, YZ; Shen, TM; Sabbi, G; Zhu, ZA; Xu, QJ; K; Peng QL(彭全岭); Cheng D(成达); Wang CT(王呈涛)
|
| 刊名 | IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
 |
| 出版日期 | 2018 |
| 卷号 | 28期号:3页码:4004105 |
| 关键词 | 20 T common-coil accelerator magnets Nb-3 Sn Bi-2212 |
| ISSN号 | 1051-8223 |
| DOI | 10.1109/TASC.2018.2795561 |
| 文献子类 | Article |
| 英文摘要 | We carried out the three-dimensional (3-D) mechanical design of a 2-m-long 20 T common-coil dipole magnet and provided solutions for coil stress management. Instead of using flared ends to make space for the beam pipe, the prototype magnet is designed with a coil configuration which consists of four Nb3Sn and six Bi-2212 flat racetrack coils. The designed peak coil field is 20.4 T at the operating current of 14 700 A. The operating margin is 11% on the load line at 4.2 K. The magnitude of the calculated Lorentz force for 1/8 model is around 1562, 405, and 206 t for the horizontal, vertical, and axial directions, respectively. The special coil configuration and such significant magnetic force bring unprecedented challenges in applying preload to coils and optimizing the coil stress and the stress in the other components. By using an extended aluminum shell and a split yoke assembly, we minimized the coil end effects and applied a uniform and large enough preload to the coil straight section and the coil ends. This paper presents the stress analysis and the optimized 3-D mechanical design of the magnet. |
| 电子版国际标准刊号 | 1558-2515 |
| WOS关键词 | FIELDS |
| WOS研究方向 | Engineering ; Physics |
| 语种 | 英语 |
| WOS记录号 | WOS:000424866700001 |
| 源URL | [http://ir.ihep.ac.cn/handle/311005/285631]  |
| 专题 | 高能物理研究所_实验物理中心 高能物理研究所_加速器中心 |
| 通讯作者 | Xu QJ(徐庆金) |
| 作者单位 | 中国科学院高能物理研究所 |
| 推荐引用方式 GB/T 7714 | Wang, CT,Wang, YZ,Shen, TM,et al. 3D Mechanical Design and Stress Analysis of 20 T Common-Coil Dipole Magnet for SppC[J]. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY,2018,28(3):4004105. |
| APA | Wang, CT.,Wang, YZ.,Shen, TM.,Sabbi, G.,Zhu, ZA.,...&Kong, ES.(2018).3D Mechanical Design and Stress Analysis of 20 T Common-Coil Dipole Magnet for SppC.IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY,28(3),4004105. |
| MLA | Wang, CT,et al."3D Mechanical Design and Stress Analysis of 20 T Common-Coil Dipole Magnet for SppC".IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY 28.3(2018):4004105. |
入库方式： OAI收割
来源：高能物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。