Production of alumina micro abrasives coated with nano-silica for bonding improvements to zirconia
文献类型：期刊论文
| 作者 | Zhang, W; Farooq, A2; Wu, WP; Kong, DJ |
| 刊名 | JOURNAL OF EXPERIMENTAL NANOSCIENCE
 |
| 出版日期 | 2018-01-07 |
| 卷号 | 13期号:1页码:211-219 |
| 关键词 | Alumina abrasive coating resin bond strength silicon nanoparticles |
| ISSN号 | 1745-8080 |
| DOI | 10.1080/17458080.2018.1502478 |
| 英文摘要 | Tribochemical silica coating is a common practice to achieve suitable adhesion with intended synthetic substrates or natural tissues, and the key to this technology is the preparation of alumina abrasive coated by nano-silica (AACNS). In this paper, a novel physical method of producing silicon nanoparticles (SiNPs) that is the base to AACNS is put forward in this paper. The source of the silica coating is from SiNPs that are produced from spark erosion in deionised water, with an average size distribution between 30 and 50nm as indicated by SEM analysis. Under optimised mixing conditions, 2g of purified SiNPs were mixed with 20g of alumina mu-particles (with an approximate diameter of 100 mu m), in the presence of ethanol and stirred thoroughly to form a slurry. The slurry is the then co-fired in an oxidation furnace, initially heated to 120 degrees C for 20minutes to evaporate the ethanol, and then re-uploaded again after compaction in a temperature of 1100 degrees C for 2hours, after which AACNS are obtained. Afterwards, shear bond strength tests are applied on zirconia ceramic bars, whose surface is modified by AACNS. The result shows that average bond strength is about 12MPa. This method also could be applied to prepare other kinds of abrasive coated by different nanoparticles for improving the bonding strength between coatings and substrates by the method of tribochemical. |
| 学科主题 | Chemistry, Multidisciplinary ; Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Physics, Applied |
| 语种 | 英语 |
| WOS记录号 | WOS:000450583500001 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/80225]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.Changzhou Univ, Sch Mech Engn, Changzhou 213164, Jiangsu, Peoples R China 2.Changzhou High Technol Res Key Lab Mould Adv Mfg, Changzhou, Jiangsu, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Shenyang, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang, W,Farooq, A,Wu, WP,et al. Production of alumina micro abrasives coated with nano-silica for bonding improvements to zirconia[J]. JOURNAL OF EXPERIMENTAL NANOSCIENCE,2018,13(1):211-219. |
| APA | Zhang, W,Farooq, A,Wu, WP,&Kong, DJ.(2018).Production of alumina micro abrasives coated with nano-silica for bonding improvements to zirconia.JOURNAL OF EXPERIMENTAL NANOSCIENCE,13(1),211-219. |
| MLA | Zhang, W,et al."Production of alumina micro abrasives coated with nano-silica for bonding improvements to zirconia".JOURNAL OF EXPERIMENTAL NANOSCIENCE 13.1(2018):211-219. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。