Correction of Flow Curves and Constitutive Modelling of a Ti-6Al-4V Alloy
文献类型：期刊论文
| 作者 | Hu, M1; Dong, LM; Zhang, ZG; Lei, XF; Yang, R1; Sha, YH |
| 刊名 | METALS
 |
| 出版日期 | 2018-04-01 |
| 卷号 | 8期号:4页码:- |
| 关键词 | Ti-6Al-4V alloy isothermal compression test correction of flow curves constitutive model |
| ISSN号 | 2075-4701 |
| DOI | 10.3390/met8040256 |
| 英文摘要 | Isothermal uniaxial compressions of a Ti-6Al-4V alloy were carried out in the temperature range of 800-1050 degrees C and strain rate range of 0.001-1 s(-1). The effects of friction between the specimen and anvils as well as the increase in temperature caused by the high strain rate deformation were considered, and flow curves were corrected as a result. Constitutive models were discussed based on the corrected flow curves. The correlation coefficient and average absolute relative error for the strain compensated Arrhenius-type constitutive model are 0.986 and 9.168%, respectively, while the values for a modified Johnson-Cook constitutive model are 0.924 and 22.673%, respectively. Therefore, the strain compensated Arrhenius-type constitutive model has a better prediction capability than a modified Johnson-Cook constitutive model. |
| 学科主题 | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000434882800059 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/80213]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.Northeastern Univ, Sch Mat Sci & Engn, 3 Wenhua Rd, Shenyang 110819, Liaoning, Peoples R China 2.Chinese Acad Sci, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Hu, M,Dong, LM,Zhang, ZG,et al. Correction of Flow Curves and Constitutive Modelling of a Ti-6Al-4V Alloy[J]. METALS,2018,8(4):-. |
| APA | Hu, M,Dong, LM,Zhang, ZG,Lei, XF,Yang, R,&Sha, YH.(2018).Correction of Flow Curves and Constitutive Modelling of a Ti-6Al-4V Alloy.METALS,8(4),-. |
| MLA | Hu, M,et al."Correction of Flow Curves and Constitutive Modelling of a Ti-6Al-4V Alloy".METALS 8.4(2018):-. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。