Free-bending process characteristics and forming process design of copper tubular components
文献类型：期刊论文
| 作者 | Guo, XZ; Xiong, H; Xu, Y; Ma, YN; Abd El-Aty, A; Tao, J; Jin, K2 |
| 刊名 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
 |
| 出版日期 | 2018-06-01 |
| 卷号 | 96期号:2018-09-12页码:3585-3601 |
| 关键词 | Free-bending Finite element analysis Forming process design Correction factor Optimization of process parameters Motion trajectory of the bending die |
| ISSN号 | 0268-3768 |
| DOI | 10.1007/s00170-018-1788-1 |
| 英文摘要 | Three-dimensional free-bending is a new and an advanced forming technology to manufacture the complex metal hollow components with continuously varying radius. In this study, the principle, process analysis, and the CNC control of free-bending were introduced in detail. The characteristics of the free-bending process, such as the motion trace scope of bending die and the stress variation in the free-bending process, were numerically investigated through finite element method using ABAQUS finite element code. With the simulation model, the material correction factor (Km) of copper was determined and the correction factor (Kc) for the clearance between the tube and bending die was also proposed. Moreover, the effects of the key process parameters including the clearance between the tube and bending die (Delta c), the distance between the center of the bending die and the head of guide sleeve (A), and the axial feeding velocity (v) on the forming quality of the tubular bending components were studied as well. Through the finite element simulation and analysis, the optimum parameters (Km, Kc, Delta c, A, and v) used in the free-bending process of the tubular component are summarized and the forming process design of the copper tubular component was also obtained. Based on the forming process design, the simulation and bending test of the copper tubular component were carried out, and the dimensions of the bending components gave a very good agreement with the results obtained from finite element modeling. Furthermore, there was no obvious cross section distortion, excessive thickening, and thinning of wall thickness of the formed tubular components. It is concluded that the three-dimensional free-bending technology is a novel forming process used to manufacture a sound complex three-dimensional hollow component with asymmetric cross sections and continuous varying radii. |
| 学科主题 | Automation & Control Systems ; Engineering, Manufacturing |
| 语种 | 英语 |
| WOS记录号 | WOS:000432974100049 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/80170]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.Nanjing Univ Aeronaut & Astronaut, Coll Mat Sci & Technol, Nanjing 211100, Jiangsu, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 3.Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing 210016, Jiangsu, Peoples R China |
| 推荐引用方式 GB/T 7714 | Guo, XZ,Xiong, H,Xu, Y,et al. Free-bending process characteristics and forming process design of copper tubular components[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,96(2018-09-12):3585-3601. |
| APA | Guo, XZ.,Xiong, H.,Xu, Y.,Ma, YN.,Abd El-Aty, A.,...&Jin, K.(2018).Free-bending process characteristics and forming process design of copper tubular components.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,96(2018-09-12),3585-3601. |
| MLA | Guo, XZ,et al."Free-bending process characteristics and forming process design of copper tubular components".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 96.2018-09-12(2018):3585-3601. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。