Boosting efficiency and stability of perovskite solar cells with nickel phthalocyanine as a low-cost hole transporting layer material
文献类型：期刊论文
| 作者 | Haider, M1; Zhen, C; Wu, TT; Liu, G2; Cheng, HM |
| 刊名 | JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
 |
| 出版日期 | 2018-09-01 |
| 卷号 | 34期号:9页码:1474-1480 |
| 关键词 | Solar cells Perovskite Hole transfer material |
| ISSN号 | 1005-0302 |
| DOI | 10.1016/j.jmst.2018.03.005 |
| 英文摘要 | The efficiency of perovskite solar cells (PSCs) has increased from around 4% to over 22% following a few years of intensive investigation. For most PSCs, organic materials such as 2,2',7,7'-tetrakis(N,N-pdimethoxyphenylamino)-9,9'-spirobifluorene (spiro-OMeTAD) are used as the hole transporting materials (HTMs), which are thermally and chemically unstable and also expensive. Here, we explored nickel phthalocyanine (NiPc) as a stable and cost-effective HTM to replace the conventionally used spiro-OMeTAD. Because of its high carrier mobility and proper band alignments, we achieved a PCE of 12.1% on NiPc based planar device with short-circuit current density (J(sc) ) of 17.64 mAcm(-2), open circuit voltage (V-oc) of 0.94V, and fill factor (FF) of 73%, outperforming the planar device based on copper phthalocyanine (CuPc) that is an outstanding representative of metal phthalocyanines (MPcs) reported. Moreover, the device with NiPc shows much improved stability compared to that based on the conventional spiro-OMeTAD as a result of NiPc's high stability. Photoluminescence (PL) and Impedance spectroscopy analysis results show that thermally deposited NiPc has good hole-extraction ability. Our results suggest that NiPc is a promising HTM for the large area, low cost and stable PSCs. (C) 2018 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology. |
| 学科主题 | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000438129900003 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/79995]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China 2.Univ Chinese Acad Sci, 19 A Yuquan Rd, Beijing 100049, Peoples R China 3.Univ Sci & Technol China, Sch Mat Sci & Engn, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China 4.Tsinghua Univ, Tsinghua Berkeley Shenzhen Inst, Low Dimens Mat & Device Lab, 1001 Xueyuan Rd, Shenzhen 518055, Peoples R China 5.King Abdulaziz Univ, Ctr Excellence Environm Studies, Jeddah 21589, Saudi Arabia |
| 推荐引用方式 GB/T 7714 | Haider, M,Zhen, C,Wu, TT,et al. Boosting efficiency and stability of perovskite solar cells with nickel phthalocyanine as a low-cost hole transporting layer material[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2018,34(9):1474-1480. |
| APA | Haider, M,Zhen, C,Wu, TT,Liu, G,&Cheng, HM.(2018).Boosting efficiency and stability of perovskite solar cells with nickel phthalocyanine as a low-cost hole transporting layer material.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,34(9),1474-1480. |
| MLA | Haider, M,et al."Boosting efficiency and stability of perovskite solar cells with nickel phthalocyanine as a low-cost hole transporting layer material".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 34.9(2018):1474-1480. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。