中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Evaluating the Microstructures and Mechanical Properties of Dissimilar Metal Joints Between a New Cast Superalloy K4750 and Hastelloy X Alloy by Using Different Filler Materials

文献类型:期刊论文

作者Xie, JL; Ma, YC; Ou, MQ; Xing, WW; Zhang, L; Liu, K
刊名MATERIALS
出版日期2018-10-01
卷号11期号:10页码:-
ISSN号1996-1944
关键词dissimilar metals new cast superalloy Hastelloy X microstructures mechanical properties
DOI10.3390/ma11102065
英文摘要Two kinds of filler materials were used to join dissimilar alloys between a new cast superalloy K4750 and Hastelloy X by tungsten gas arc welding (GTAW). The segregation behavior, interfacial microstructure and mechanical properties of the dissimilar joints were evaluated. The results show that both filler materials can be used to obtain sound dissimilar joints successfully. Microstructural observation show that no obvious cracking is observed in the joints achieved by both filler materials. The segregation extent of various elements in Hastelloy X weld metal is more severe than that in the K4750 weld metal. No unmixed zones were observed at the interfaces. Transition areas with the chemical compositions various between the K4750 alloy and the Hastelloy X alloy were found at the joint interfaces. The maximum width of the transition area between the K4750 weld metal and Hastelloy X base metal is smaller than that between the Hastelloy X weld metal and K4750 base metal. The ultimate tensile strength and yield strength of the joints with Hastelloy X filler material are slightly higher than those with K4750 filler material, however, the K4750 filler material results in a higher total elongation and fusion zone microhardness than those with Hastelloy X filler material. Both dissimilar joints fractured with a ductile feature which exhibits tearing edges and dimples. Hastelloy X filler material is suggested to be more suitable for joining of K4750 superalloy and Hastelloy X dissimilar metals in terms of obtaining superior comprehensive mechanical properties.
学科主题Materials Science, Multidisciplinary
语种英语
WOS记录号WOS:000448658400279
源URL[http://ir.imr.ac.cn/handle/321006/79909]  
专题金属研究所_中国科学院金属研究所
作者单位1.Chinese Acad Sci, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China
2.Univ Sci & Technol China, Sch Mat Sci & Engn, 96 Jinzhai Rd, Hefei 230026, Anhui, Peoples R China
推荐引用方式
GB/T 7714
Xie, JL,Ma, YC,Ou, MQ,et al. Evaluating the Microstructures and Mechanical Properties of Dissimilar Metal Joints Between a New Cast Superalloy K4750 and Hastelloy X Alloy by Using Different Filler Materials[J]. MATERIALS,2018,11(10):-.
APA Xie, JL,Ma, YC,Ou, MQ,Xing, WW,Zhang, L,&Liu, K.(2018).Evaluating the Microstructures and Mechanical Properties of Dissimilar Metal Joints Between a New Cast Superalloy K4750 and Hastelloy X Alloy by Using Different Filler Materials.MATERIALS,11(10),-.
MLA Xie, JL,et al."Evaluating the Microstructures and Mechanical Properties of Dissimilar Metal Joints Between a New Cast Superalloy K4750 and Hastelloy X Alloy by Using Different Filler Materials".MATERIALS 11.10(2018):-.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。