Comparison of critical flow velocity for erosion-corrosion of six stainless steels in 3.5 wt% NaCl solution containing 2 wt% silica sand particles
文献类型：期刊论文
| 作者 | Yi, JZ; Hu, HX; Wang, ZB; Zheng, YG |
| 刊名 | WEAR
 |
| 出版日期 | 2018-12-15 |
| 卷号 | 416页码:62-71 |
| ISSN号 | 0043-1648 |
| 关键词 | Stainless steels Erosion-corrosion Electrochemistry Passivation Critical flow velocity |
| DOI | 10.1016/j.wear.2018.10.006 |
| 英文摘要 | Critical flow velocity (CFV) is one of the valid parameters to evaluate the erosion-corrosion performance of passive materials. The comparison of CFV for common passive materials is significant for the engineering applications. This study focuses on the comparison of CFV for different types of stainless steel (SS), including the pearlitic 2Cr13 SS, austenitic 304 SS, 316 SS, 254 SMO SS, and two duplex stainless steels (DSS) (2205 DSS and 2507 DSS) in 3.5 wt% NaCl solution containing 2 wt% silica sand particles using the impingement jet apparatus. Different methods (potentiostatic polarization tests, mass loss measurements and surface roughness measurements) were used to determine the CFV and the values of CFV derived from different methods showed a good consistency. The 254 SMO SS exhibited the highest CFV, followed by 2507 DSS, 2205 DSS and 316 SS, and 304 SS and 2Cr13 SS. Compared with the mass loss method which is normally time-consuming, comprehensive evaluation based on the critical flow velocity and current density at flow velocity higher than the critical value by using potentiostatic polarization tests is more effective and efficient for the material selection for erosion-corrosion. |
| 学科主题 | Engineering, Mechanical ; Materials Science, Multidisciplinary |
| 语种 | 英语 |
| WOS记录号 | WOS:000448334300008 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/79774]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.[Yi, J. Z. 2.Hu, H. X. 3.Wang, Z. B. 4.Zheng, Y. G.] Chinese Acad Sci, CAS Key Lab Nucl Mat & Safety Assessment, Inst Met Res, 62 Wencui Rd, Shenyang 110016, Liaoning, Peoples R China 5.[Yi, J. Z.] Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Yi, JZ,Hu, HX,Wang, ZB,et al. Comparison of critical flow velocity for erosion-corrosion of six stainless steels in 3.5 wt% NaCl solution containing 2 wt% silica sand particles[J]. WEAR,2018,416:62-71. |
| APA | Yi, JZ,Hu, HX,Wang, ZB,&Zheng, YG.(2018).Comparison of critical flow velocity for erosion-corrosion of six stainless steels in 3.5 wt% NaCl solution containing 2 wt% silica sand particles.WEAR,416,62-71. |
| MLA | Yi, JZ,et al."Comparison of critical flow velocity for erosion-corrosion of six stainless steels in 3.5 wt% NaCl solution containing 2 wt% silica sand particles".WEAR 416(2018):62-71. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。