Investigation on the microstructure and tensile behavior of a Ni-based IN792 superalloy
文献类型：期刊论文
| 作者 | Du, BN; Sheng, LY; Hu, ZY; Cui, CY; Yang, JX; Sun, XF; Cui, CY (reprint author), Chinese Acad Sci, Inst Met Res, 72Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China.; Sheng, LY (reprint author), Peking Univ, Shenzhen Inst, South Area, Room W803,Hitech Pk, Shenzhen 518057, Peoples R China. |
| 刊名 | ADVANCES IN MECHANICAL ENGINEERING
 |
| 出版日期 | 2018-02-11 |
| 卷号 | 10期号:2页码:- |
| 关键词 | Nickel-based Superalloy Intermediate-temperature Embrittlement Mechanical-properties Grain-boundary Deformation-behavior Heat-treatments Alloy Refinement Carbides Gtd-111 |
| ISSN号 | 1687-8140 |
| 英文摘要 | The Ni-based IN792 superalloy is widely used in aeroengine components because of its low manufacturing cost and good mid-temperature (600 degrees C-900 degrees C) properties. However, its mechanical properties exhibit fluctuation with temperature, so a comprehensive understanding on the tensile behavior of IN792 superalloy at different temperatures is necessary. In this article, IN792 superalloy was fabricated and heat treated with the standard heat treatment of 1120 degrees C/2h air cooling + 1080 degrees C/4h air cooling + 845 degrees C/24h air cooling, and its tensile behavior at 550 degrees C, 600 degrees C, 650 degrees C, 700 degrees C, 760 degrees C, 850 degrees C, and 900 degrees C was investigated. The results showed that IN792 superalloy exhibited obvious anomalous yield and intermediate temperature brittleness behaviors. The yield strength and ultimate strength of IN792 superalloy changed little below 760 degrees C, but decreased significantly as the temperature increases to above 760 degrees C. The ductility of IN792 superalloy had a little increase between 550 degrees C and 600 degrees C and then decreased significantly at 650 degrees C and 700 degrees C. As the tensile temperature increases from 700 degrees C to 850 degrees C, the ductility of IN792 superalloy increased again. However, when the temperature continues to rise to 900 degrees C, the ductility dropped greatly. Such a tensile behavior of IN792 superalloy should be ascribed to the microstructure, such as the MC carbide, gamma/gamma' eutectic structure, and gamma' phase.; The Ni-based IN792 superalloy is widely used in aeroengine components because of its low manufacturing cost and good mid-temperature (600 degrees C-900 degrees C) properties. However, its mechanical properties exhibit fluctuation with temperature, so a comprehensive understanding on the tensile behavior of IN792 superalloy at different temperatures is necessary. In this article, IN792 superalloy was fabricated and heat treated with the standard heat treatment of 1120 degrees C/2h air cooling + 1080 degrees C/4h air cooling + 845 degrees C/24h air cooling, and its tensile behavior at 550 degrees C, 600 degrees C, 650 degrees C, 700 degrees C, 760 degrees C, 850 degrees C, and 900 degrees C was investigated. The results showed that IN792 superalloy exhibited obvious anomalous yield and intermediate temperature brittleness behaviors. The yield strength and ultimate strength of IN792 superalloy changed little below 760 degrees C, but decreased significantly as the temperature increases to above 760 degrees C. The ductility of IN792 superalloy had a little increase between 550 degrees C and 600 degrees C and then decreased significantly at 650 degrees C and 700 degrees C. As the tensile temperature increases from 700 degrees C to 850 degrees C, the ductility of IN792 superalloy increased again. However, when the temperature continues to rise to 900 degrees C, the ductility dropped greatly. Such a tensile behavior of IN792 superalloy should be ascribed to the microstructure, such as the MC carbide, gamma/gamma' eutectic structure, and gamma' phase. |
| 学科主题 | Thermodynamics ; Engineering, Mechanical |
| 语种 | 英语 |
| 资助机构 | The Shenzhen Technology Innovation Plan [CXZZ20140731091722497, CXZZ20140419114548507]; Shenzhen Basic Research Project [JCYJ20150529162228734, JCYJ20160407090231002, JCYJ20150625155931806, JCYJ20160427100211076, JCYJ 20140419114548515] |
| 公开日期 | 2018-06-05 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/79507]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Cui, CY (reprint author), Chinese Acad Sci, Inst Met Res, 72Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China.; Sheng, LY (reprint author), Peking Univ, Shenzhen Inst, South Area, Room W803,Hitech Pk, Shenzhen 518057, Peoples R China. |
| 推荐引用方式 GB/T 7714 | Du, BN,Sheng, LY,Hu, ZY,et al. Investigation on the microstructure and tensile behavior of a Ni-based IN792 superalloy[J]. ADVANCES IN MECHANICAL ENGINEERING,2018,10(2):-. |
| APA | Du, BN.,Sheng, LY.,Hu, ZY.,Cui, CY.,Yang, JX.,...&Sheng, LY .(2018).Investigation on the microstructure and tensile behavior of a Ni-based IN792 superalloy.ADVANCES IN MECHANICAL ENGINEERING,10(2),-. |
| MLA | Du, BN,et al."Investigation on the microstructure and tensile behavior of a Ni-based IN792 superalloy".ADVANCES IN MECHANICAL ENGINEERING 10.2(2018):-. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。