Flow behavior and processing map for hot deformation of ATI425 titanium alloy
文献类型：期刊论文
| 作者 | Meng, QG; Bai, CG; Xu, DS; Bai, CG (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China. |
| 刊名 | JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
 |
| 出版日期 | 2018-04-01 |
| 卷号 | 34期号:4页码:679-688 |
| 关键词 | Constitutive Equation Instability Criteria Elevated-temperature Zr Alloy Microstructure Working |
| ISSN号 | 1005-0302 |
| 英文摘要 | Flow behavior and processing map play important roles in the hot deformation process of titanium alloys. In this research, compression Gleeble tests have been carried out to investigate the stress-strain relationship at temperatures ranging from 700 to 1000 degrees C and strain rates ranging from 0.001 to 1 s(-1) for ATI 425 titanium alloy. Arrhenius type constitutive equation was obtained to describe the compressive flow behavior with modification of additional deformation dead zone, friction model, temperature model and strain rate. The introduction of novel calculation method for alpha value in Arrhenius equation gives more accurate fitting than traditional one. Processing maps were drawn based on the distribution of dissipator co-content, and optimized deformation temperature and strain rate range obtained. It is proven to be accurate and effective through the experimental results. The microstructure analysis shows that more dynamic recrystallization can be achieved in the area with larger eta value on the processing map. (C) 2017 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.; Flow behavior and processing map play important roles in the hot deformation process of titanium alloys. In this research, compression Gleeble tests have been carried out to investigate the stress-strain relationship at temperatures ranging from 700 to 1000 degrees C and strain rates ranging from 0.001 to 1 s(-1) for ATI 425 titanium alloy. Arrhenius type constitutive equation was obtained to describe the compressive flow behavior with modification of additional deformation dead zone, friction model, temperature model and strain rate. The introduction of novel calculation method for alpha value in Arrhenius equation gives more accurate fitting than traditional one. Processing maps were drawn based on the distribution of dissipator co-content, and optimized deformation temperature and strain rate range obtained. It is proven to be accurate and effective through the experimental results. The microstructure analysis shows that more dynamic recrystallization can be achieved in the area with larger eta value on the processing map. (C) 2017 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology. |
| 学科主题 | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| 公开日期 | 2018-06-05 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/79400]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Bai, CG (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China. |
| 推荐引用方式 GB/T 7714 | Meng, QG,Bai, CG,Xu, DS,et al. Flow behavior and processing map for hot deformation of ATI425 titanium alloy[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2018,34(4):679-688. |
| APA | Meng, QG,Bai, CG,Xu, DS,&Bai, CG .(2018).Flow behavior and processing map for hot deformation of ATI425 titanium alloy.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,34(4),679-688. |
| MLA | Meng, QG,et al."Flow behavior and processing map for hot deformation of ATI425 titanium alloy".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 34.4(2018):679-688. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。