Effect of Intercritical Quenching on the Microstructure and Cryogenic Mechanical Properties of a 7 Pct Ni Steel
文献类型：期刊论文
| 作者 | Cao, Hongwei; Luo, Xinghong; Zhan, Guofeng; Liu, Shi; Luo, XH (reprint author), Chinese Acad Sci, Inst Met Res, CAS Key Lab Nucl Mat & Safety Assessment, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China. |
| 刊名 | SPRINGER
 |
| 出版日期 | 2017-09-01 |
| 卷号 | 48A期号:9页码:4403-4410 |
| ISSN号 | 1073-5623 |
| 英文摘要 | The effects of variation in the intercritical quench temperature of quench, intercritical quench, and temper (QLT) heat treatments on the microstructure and cryogenic mechanical properties of a 7 pct Ni steel are presented. The intercritical temperatures were in the range of 923 K to 983 K (650 A degrees C to 710 A degrees C) and were followed by quenching. The microstructures as determined by optical microscope, scanning electron microscope, and transmission electron microscopy, and X-ray diffraction are presented, and the results of low-temperature mechanical property tests are given. It is shown that both the grain size and the martensite lath width increased as the intercritical quench temperature increased, while the measured amount of reversed austenite decreased with increasing temperature. Higher amounts of stabilizing elements, such as Ni and Mn, which can improve the stability of reversed austenite, were absorbed by intercritical quenching from 963 K and 983 K (690 A degrees C and 710 A degrees C) than from 923 K and 943 K (650 A degrees C and 670 A degrees C). Both the stability and the amount of reversed austenite had critical effects on the cryogenic mechanical properties of the steel. An excellent combination of cryogenic strength and toughness was achieved by intercritical quenching from 963 K (690 A degrees C), indicating that based on the cryogenic mechanical properties, 7 pct Ni-QLT steel could be used in place of 9 pct Ni steel for liquefied natural gas projects.; The effects of variation in the intercritical quench temperature of quench, intercritical quench, and temper (QLT) heat treatments on the microstructure and cryogenic mechanical properties of a 7 pct Ni steel are presented. The intercritical temperatures were in the range of 923 K to 983 K (650 A degrees C to 710 A degrees C) and were followed by quenching. The microstructures as determined by optical microscope, scanning electron microscope, and transmission electron microscopy, and X-ray diffraction are presented, and the results of low-temperature mechanical property tests are given. It is shown that both the grain size and the martensite lath width increased as the intercritical quench temperature increased, while the measured amount of reversed austenite decreased with increasing temperature. Higher amounts of stabilizing elements, such as Ni and Mn, which can improve the stability of reversed austenite, were absorbed by intercritical quenching from 963 K and 983 K (690 A degrees C and 710 A degrees C) than from 923 K and 943 K (650 A degrees C and 670 A degrees C). Both the stability and the amount of reversed austenite had critical effects on the cryogenic mechanical properties of the steel. An excellent combination of cryogenic strength and toughness was achieved by intercritical quenching from 963 K (690 A degrees C), indicating that based on the cryogenic mechanical properties, 7 pct Ni-QLT steel could be used in place of 9 pct Ni steel for liquefied natural gas projects. |
| 学科主题 | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| 资助机构 | WISCO |
| 公开日期 | 2018-01-10 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/79133]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Luo, XH (reprint author), Chinese Acad Sci, Inst Met Res, CAS Key Lab Nucl Mat & Safety Assessment, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China. |
| 推荐引用方式 GB/T 7714 | Cao, Hongwei,Luo, Xinghong,Zhan, Guofeng,et al. Effect of Intercritical Quenching on the Microstructure and Cryogenic Mechanical Properties of a 7 Pct Ni Steel[J]. SPRINGER,2017,48A(9):4403-4410. |
| APA | Cao, Hongwei,Luo, Xinghong,Zhan, Guofeng,Liu, Shi,&Luo, XH .(2017).Effect of Intercritical Quenching on the Microstructure and Cryogenic Mechanical Properties of a 7 Pct Ni Steel.SPRINGER,48A(9),4403-4410. |
| MLA | Cao, Hongwei,et al."Effect of Intercritical Quenching on the Microstructure and Cryogenic Mechanical Properties of a 7 Pct Ni Steel".SPRINGER 48A.9(2017):4403-4410. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。