Friction stir welding of carbon nanotubes reinforced Al-Cu-Mg alloy composite plates
文献类型：期刊论文
| 作者 | Zhao, Ke; Liu, Zhenyu; Xiao, Bolyu; Ma, Zongyi; Xiao, BY (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Liaoning, Peoples R China. |
| 刊名 | JOURNAL MATER SCI TECHNOL
 |
| 出版日期 | 2017-09-01 |
| 卷号 | 33期号:9页码:1004-1008 |
| 关键词 | Carbon Nanotubes Metal Matrix Composites Friction Stir Welding |
| ISSN号 | 1005-0302 |
| 英文摘要 | Carbon nanotubes (CNTs) reinforced Al-Cu-Mg composite plates of 2.2 mm in thickness after extrusion and T4 treatment were joined by friction stir welding (FSW) and the joint efficiency reaches 87%. There was no precipitate in both heat-affected zone (HAZ) and nugget zone (NZ) as a medium rotation rate of 800 rpm and a relative high travel speed of 100 mm min(-1) were used. In the NZ, FSW disarranged the alignment of CNTs to random orientation and dispersed CNT uniformly. The orientation of CNTs perpendicular to the tensile direction and the possible dissolution of solute clusters made the HAZ become the weakest zone in the joint leading to the failure in the HAZ. (C) 2017 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.; Carbon nanotubes (CNTs) reinforced Al-Cu-Mg composite plates of 2.2 mm in thickness after extrusion and T4 treatment were joined by friction stir welding (FSW) and the joint efficiency reaches 87%. There was no precipitate in both heat-affected zone (HAZ) and nugget zone (NZ) as a medium rotation rate of 800 rpm and a relative high travel speed of 100 mm min(-1) were used. In the NZ, FSW disarranged the alignment of CNTs to random orientation and dispersed CNT uniformly. The orientation of CNTs perpendicular to the tensile direction and the possible dissolution of solute clusters made the HAZ become the weakest zone in the joint leading to the failure in the HAZ. (C) 2017 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology. |
| 学科主题 | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| 资助机构 | National Basic Research Program of China [2011CB932603, 2012CB619600]; CAS/SAFEA International Partnership Program for Creative Research Teams; National Natural Science Foundation of China [51501189] |
| 公开日期 | 2018-01-10 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/79118]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Xiao, BY (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Liaoning, Peoples R China. |
| 推荐引用方式 GB/T 7714 | Zhao, Ke,Liu, Zhenyu,Xiao, Bolyu,et al. Friction stir welding of carbon nanotubes reinforced Al-Cu-Mg alloy composite plates[J]. JOURNAL MATER SCI TECHNOL,2017,33(9):1004-1008. |
| APA | Zhao, Ke,Liu, Zhenyu,Xiao, Bolyu,Ma, Zongyi,&Xiao, BY .(2017).Friction stir welding of carbon nanotubes reinforced Al-Cu-Mg alloy composite plates.JOURNAL MATER SCI TECHNOL,33(9),1004-1008. |
| MLA | Zhao, Ke,et al."Friction stir welding of carbon nanotubes reinforced Al-Cu-Mg alloy composite plates".JOURNAL MATER SCI TECHNOL 33.9(2017):1004-1008. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。