Analysis of asymmetrical cold rolling with varying coefficients of friction
文献类型：期刊论文
| 作者 | Gao H; Ramalingam SC; Barber GC; Chen G |
| 刊名 | Journal of Materials Processing Technology
 |
| 出版日期 | 2002 |
| 卷号 | 124期号:1-2页码:178-182 |
| 关键词 | Asymmetrical Cold Rolling Frictional Coefficient Ratio Slab Method |
| ISSN号 | 0924-0136 |
| 通讯作者 | Gao, H (reprint author), Oakland Univ, Dept Mech Engn, Rochester, MI 48309 USA. |
| 中文摘要 | In this research, asymmetrical cold rolling was produced by the difference in the coefficient of friction between rolls and sheets rather than the difference of roll radius or rotation speeds. The influence of friction coefficient ratio on the cross shear deformation, rolling pressure and torque was investigated using slab analysis. The results showed that the shear deformation zone length increased with the increase of the friction coefficient ratio. The rolling force decreased only under the condition that the friction coefficient ratio increased while the sum of the friction coefficients was held constant. As the reduction per pass was increased, the shear deformation zone length increased and the rolling force also increased. An increase of the front tension resulted in a decrease of the shear deformation zone length. An increase of back tension, however, led to an increase of the shear deformation zone length. The reduction of rolling torque for the work roll with higher surface roughness was greater than that for the work roll with lower surface roughness. (C) 2002 Elsevier Science B.V. All rights reserved. |
| 类目[WOS] | Engineering, Industrial ; Engineering, Manufacturing ; Materials Science, Multidisciplinary |
| 研究领域[WOS] | Engineering ; Materials Science |
| 收录类别 | SCI ; EI |
| 语种 | 英语 |
| WOS记录号 | WOS:000176776800025 |
| 公开日期 | 2009-08-03 ; 2010-06-13 |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/33691]  |
| 专题 | 力学研究所_力学所知识产出(1956-2008) |
| 推荐引用方式 GB/T 7714 | Gao H,Ramalingam SC,Barber GC,et al. Analysis of asymmetrical cold rolling with varying coefficients of friction[J]. Journal of Materials Processing Technology,2002,124(1-2):178-182. |
| APA | Gao H,Ramalingam SC,Barber GC,&Chen G.(2002).Analysis of asymmetrical cold rolling with varying coefficients of friction.Journal of Materials Processing Technology,124(1-2),178-182. |
| MLA | Gao H,et al."Analysis of asymmetrical cold rolling with varying coefficients of friction".Journal of Materials Processing Technology 124.1-2(2002):178-182. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。