Structure and mechanical properties of ceramic coatings fabricated by plasma electrolytic oxidation on aluminized steel
文献类型:期刊论文
作者 | Wu ZQ(吴振强); Xia Y(夏原)![]() ![]() ![]() |
刊名 | Applied Surface Science
![]() |
出版日期 | 2007 |
卷号 | 253期号:20页码:8398-8403 |
通讯作者邮箱 | xia@imech.ac.cn |
关键词 | Hot-Dip Aluminum Plasma Electrolytic Oxidation Ceramic Coatings Steel Substrate Microarc Oxidation Alloy Surface |
ISSN号 | 0169-4332 |
通讯作者 | Xia, Y (reprint author), Chinese Acad Sci, Inst Mech, Beijing 100080, Peoples R China. |
中文摘要 | Ceramic coatings were formed by plasma electrolytic oxidation (PEO) on aluminized steel. Characteristics of the average anodic voltages versus treatment time were observed during the PEO process. The micrographs, compositions and mechanical properties of ceramic coatings were investigated. The results show that the anodic voltage profile for processing of aluminized steel is similar to that for processing bulk Al alloy during early PEO stages and that the thickness of ceramic coating increases approximately linearly with the Al layer consumption. Once the Al layer is completely transformed, the FeAl intermetallic layer begins to participate in the PEO process. At this point, the anodic voltage of aluminized steel descends, and the thickness of ceramic coating grows more slowly. At the same time, some micro-cracks are observed at the Al2O3/FeAl interface. The final ceramic coating mainly consists of gamma-Al2O3, mullite, and alpha-Al2O3 phases. PEO ceramic coatings have excellent elastic recovery and high load supporting performance. Nanohardness of ceramic coating reaches about 19.6 GPa. (c) 2007 Elsevier B. V. All rights reserved. |
类目[WOS] | Chemistry, Physical ; Materials Science, Coatings & Films ; Physics, Applied ; Physics, Condensed Matter |
研究领域[WOS] | Chemistry ; Materials Science ; Physics |
关键词[WOS] | MICROARC OXIDATION ; ALLOY ; SURFACE |
收录类别 | SCI ; EI |
语种 | 英语 |
WOS记录号 | WOS:000249020600012 |
公开日期 | 2009-08-03 ; 2010-06-13 |
源URL | [http://dspace.imech.ac.cn/handle/311007/33929] ![]() |
专题 | 力学研究所_力学所知识产出(1956-2008) |
推荐引用方式 GB/T 7714 | Wu ZQ,Xia Y,Li G,et al. Structure and mechanical properties of ceramic coatings fabricated by plasma electrolytic oxidation on aluminized steel[J]. Applied Surface Science,2007,253(20):8398-8403. |
APA | 吴振强,夏原,李光,&徐方涛.(2007).Structure and mechanical properties of ceramic coatings fabricated by plasma electrolytic oxidation on aluminized steel.Applied Surface Science,253(20),8398-8403. |
MLA | 吴振强,et al."Structure and mechanical properties of ceramic coatings fabricated by plasma electrolytic oxidation on aluminized steel".Applied Surface Science 253.20(2007):8398-8403. |
入库方式: OAI收割
来源:力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。