Modification on the contact model of LiPb and noncondensable gas in RELAP/SCDAPSIM/MOD4.0 and application to LOCA of China DFLL-TBM
文献类型：期刊论文
| 作者 | Sun, Qian1; Peng, Tianji2; Zhou, Zhiwei1; Chen, Zhibin3; Wang, Shisheng3 |
| 刊名 | FUSION ENGINEERING AND DESIGN
 |
| 出版日期 | 2018-09 |
| 卷号 | 134页码:35-42 |
| 关键词 | DFLL-TBM In-TBM breeder box coolant leak Liquid lithium lead Modified RELAP/SCDAPS/MOD4.0 |
| ISSN号 | 0920-3796 |
| DOI | 10.1016/j.fusengdes.2018.06.020 |
| 英文摘要 | In-TBM breeder box coolant leak is one of four reference accidents identified for China Dual-functional Lithium Lead Test Blanket Module (DFLL-TBM), which will result in the pressurization of the TBM LiPb breeding zones and cooling system. In order to analyze In-TBM breeder box coolant leak accident, there is a need to simulate the mixing of liquid metal and non-condensable gas. While the current system safety code RELAP/SCDAPSIM/MOD4.0 which was initially designed to predict the behavior of light water reactor systems is incapable of modeling the mixture of liquid metal fluids and non-condensable gas. This paper first briefly introduce the reason for RELAP/SCDAPS/MOD4.0's incapability of modeling liquid metal in contact with a non-condensable gas. Then, a solution to solve the problem and the modification of the RELAP/SCDAPSIM/MOD4.0 code is proposed. Several typical problems involving liquid metal in contact with helium were simulated and the results demonstrate the feasibility and validity of the modified RELAP/SCDAPS/MOD4.0 in modeling the mixing of liquid metal and non-condensable gas. Last but not least, the modified RELAP/SCDAPS/MOD4.0 is used for transient analysis of In-TBM breeder box coolant leaks. Since both lead-lithium eutectic alloy and helium serve as TBM coolants, the Lithium Lead Cooling System (LLCS) and the Helium Cooling System (HCS) were modeled to investigate the thermal-hydraulic characteristic of the TBM system and its influence on ITER safety under the accident conditions. Results show that LLCS pressurization during In-TBM breeder box coolant leak is adequately handled by the safety accessories provided in LLCS and the highest temperature of the first wall is far below its melting point during the accident process. |
| WOS关键词 | SOLID BREEDER BLANKET ; CONCEPTUAL DESIGN ; REACTOR ; CFETR ; OPTIMIZATION ; RELAP5 ; MODULE ; ITER |
| 资助项目 | National Basic Research Program of China[2014GB116000] |
| WOS研究方向 | Nuclear Science & Technology |
| 语种 | 英语 |
| WOS记录号 | WOS:000444927900006 |
| 出版者 | ELSEVIER SCIENCE SA |
| 源URL | [http://119.78.100.186/handle/113462/59663]  |
| 专题 | 中国科学院近代物理研究所 |
| 通讯作者 | Zhou, Zhiwei |
| 作者单位 | 1.Tsinghua Univ, Inst Nucl & New Energy Technol, Collaborat Innovat Ctr Adv Nucl Energy Technol, Beijing, Peoples R China 2.Chinese Acad Sci, Inst Modern Phys, Lanzhou, Gansu, Peoples R China 3.Chinese Acad Sci, Inst Nucl Energy Safety Technol, Key Lab Neutron & Radiat Safety, Hefei, Anhui, Peoples R China |
| 推荐引用方式 GB/T 7714 | Sun, Qian,Peng, Tianji,Zhou, Zhiwei,et al. Modification on the contact model of LiPb and noncondensable gas in RELAP/SCDAPSIM/MOD4.0 and application to LOCA of China DFLL-TBM[J]. FUSION ENGINEERING AND DESIGN,2018,134:35-42. |
| APA | Sun, Qian,Peng, Tianji,Zhou, Zhiwei,Chen, Zhibin,&Wang, Shisheng.(2018).Modification on the contact model of LiPb and noncondensable gas in RELAP/SCDAPSIM/MOD4.0 and application to LOCA of China DFLL-TBM.FUSION ENGINEERING AND DESIGN,134,35-42. |
| MLA | Sun, Qian,et al."Modification on the contact model of LiPb and noncondensable gas in RELAP/SCDAPSIM/MOD4.0 and application to LOCA of China DFLL-TBM".FUSION ENGINEERING AND DESIGN 134(2018):35-42. |
入库方式： OAI收割
来源：近代物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。