中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 近代物理研究所
  3. 中国科学院近代物理研究所
Design, fabrication and performance of taper cavity cryomodule for ADS Injector II

文献类型：期刊论文

作者Bai, Feng1,2; Zhang, Jun-Hui1; Hu, Chuan-Fei1,2; Wan, Yu-Qin1; Niu, Xiao-Fei1; Han, Yan-Ning1; Zhang, Peng1; Zhao, Yu-Gang1; Ma, Li-zhen1
刊名NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT
出版日期2018-09-21
卷号903页码:70-76
关键词ADS linac SRF Cryomodule Heat load Pressure fluctuation
ISSN号0168-9002
DOI10.1016/j.nima.2018.05.074
英文摘要A beta = 0.15 taper cavity cryomodule was designed for the China Accelerator Driven Sub-critical System Injector II(ADS) at the Institute of Modern Physics (IMP) of the Chinese Academy of Science (CAS). This cryomodule is the third cryomodule of the ADS Linac and contains five beta = 0.15 taper cavities and five 5.5 T solenoids that operate at 4.2 K and 1.05 Bar. Manufacturing of the cryomodule and construction of the cold mass was finished at the beginning of 2017. The cryomodule assembly was completed at the end of March, 2017. The ADS Injector II linac accelerated a 10 mA proton beam to 25 MeV in June of 2017. This paper reports the design, fabrication and performance of this taper cavity cryomodule.
WOS关键词CURRENT LEADS
资助项目CAS[Y617020YRC]
WOS研究方向Instruments & Instrumentation ; Nuclear Science & Technology ; Physics
语种英语
WOS记录号WOS:000444422200009
出版者ELSEVIER SCIENCE BV
源URL[http://119.78.100.186/handle/113462/59690]  
专题中国科学院近代物理研究所
作者单位1.Chinese Acad Sci, Inst Modern Phys, Lanzhou 730000, Gansu, Peoples R China
2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China
推荐引用方式
GB/T 7714		 Bai, Feng,Zhang, Jun-Hui,Hu, Chuan-Fei,et al. Design, fabrication and performance of taper cavity cryomodule for ADS Injector II[J]. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT,2018,903:70-76.
APA Bai, Feng.,Zhang, Jun-Hui.,Hu, Chuan-Fei.,Wan, Yu-Qin.,Niu, Xiao-Fei.,...&Ma, Li-zhen.(2018).Design, fabrication and performance of taper cavity cryomodule for ADS Injector II.NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT,903,70-76.
MLA Bai, Feng,et al."Design, fabrication and performance of taper cavity cryomodule for ADS Injector II".NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT 903(2018):70-76.

入库方式： OAI收割

来源：近代物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。