Modelling of reactor pressure vessel subjected to pressurized thermal shock using 3D-XFEM
文献类型：期刊论文
| 作者 | Niceno B1; Jaros M1; Qian GA(钱桂安)2,3 ; Niffenegger M3; Mora DF3
|
| 刊名 | NUCLEAR ENGINEERING AND DESIGN
 |
| 出版日期 | 2019-11-01 |
| 卷号 | 353页码:13 |
| 关键词 | Pressurized thermal shock Large Break LOCA Stress intensity factor Reactor pressure vessel Fracture mechanics XFEM |
| ISSN号 | 0029-5493 |
| DOI | 10.1016/j.nucengdes.2019.110237 |
| 通讯作者 | Mora, Diego F.(diego.mora@psi.ch) |
| 英文摘要 | We describe the model developed for integrity assessment of a reactor pressure vessel (RPV) subjected to pressurized thermal shock (PTS). The assessment is based on a multi-step simulation scheme, which includes the thermo-hydraulic, thermo-mechanical and fracture mechanics analyses. The thermo-mechanical model uses the three-dimensional finite element method (FEM) to calculate the stress fields of the reactor pressure vessel (RPV) subjected to the thermal load and pressure during large break loss of coolant accident (LBLOCA). In this contribution, the multistep simulation scheme is extended to the analysis of two-phase steam-water flow occurring in the LBLOCA situation and the fracture analysis of postulated cracks under this accident event. It is demonstrated that the principle of the combined one-way coupled system code, CFD and structural mechanics codes can be used for the fracture analysis in case of a transient accident, which involves two-phase flow. The prediction of the temperature field is achieved by using two-phase computational fluid dynamics (CFD) simulation. To perform the stress analysis, an appropriate finite element discretization of the RPV wall is used, which considered the cladding and the ferritic low allow steel. The calculation of the stress intensity factor (SIF) in mode I for hypothetical cracks located in critical positions of the RPV is based on the linear elastic fracture mechanics (LEFM). The fracture mechanics model is based on the node-based submodeling technique in combination with XFEM in Abaqus. This is used to refine the mesh required by the fracture analysis in the region of interest, especially those regions under the cooling plume formed during the LBLOCA. The submodel may contain three types of cracks: axial, circumferential and inclined. The performed integrity assessment compares the stress intensity factor calculated in the deepest point of a surface crack with the material's fracture toughness. Two approaches to extract the stress intensity factor were applied in the present paper, namely, the classical FEM and eXtended FEM or XFEM. The classical FEM and XFEM solutions are compared. Both techniques give similar results. However, XFEM is more convenient as it is mesh independent. |
| 分类号 | 二类/Q1 |
| WOS关键词 | STRESS INTENSITY FACTORS ; EXTENDED FINITE-ELEMENT ; HOLLOW CYLINDERS ; AXIAL CRACKS ; PTS ; SIMULATION ; GROWTH |
| 资助项目 | PROBAB project by the Swiss Federal Nuclear Safety Inspectorate (ENSI)[H-101247] |
| WOS研究方向 | Nuclear Science & Technology |
| 语种 | 英语 |
| WOS记录号 | WOS:000487821600025 |
| 资助机构 | PROBAB project by the Swiss Federal Nuclear Safety Inspectorate (ENSI) |
| 其他责任者 | Mora, Diego F. |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/80667]  |
| 专题 | 力学研究所_非线性力学国家重点实验室 |
| 作者单位 | 1.Paul Scherrer Inst, Nucl Energy & Safety Dept, Lab Sci Comp & Modelling, Forsch Str 111, CH-5232 Villigen, Switzerland 2.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech LNM, Beijing 100190, Peoples R China; 3.Paul Scherrer Inst, Nucl Energy & Safety Dept, Struct Integr Grp, Forsch Str 111, CH-5232 Villigen, Switzerland; |
| 推荐引用方式 GB/T 7714 | Niceno B,Jaros M,Qian GA,et al. Modelling of reactor pressure vessel subjected to pressurized thermal shock using 3D-XFEM[J]. NUCLEAR ENGINEERING AND DESIGN,2019,353:13. |
| APA | Niceno B,Jaros M,钱桂安,Niffenegger M,&Mora DF.(2019).Modelling of reactor pressure vessel subjected to pressurized thermal shock using 3D-XFEM.NUCLEAR ENGINEERING AND DESIGN,353,13. |
| MLA | Niceno B,et al."Modelling of reactor pressure vessel subjected to pressurized thermal shock using 3D-XFEM".NUCLEAR ENGINEERING AND DESIGN 353(2019):13. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。