3D printing of bioinspired topographically oriented surfaces with frictional anisotropy for directional driving
文献类型:期刊论文
作者 | Ji ZY(姬忠莹)2,3; Yan CY(闫昌友)2,3; Ma SH(麻拴红)2; Stanislav Gorb4; Jia X(贾鑫)1; Zhou F(周峰)2; Wang XL(王晓龙)1,2,5; Yu B(于波)2 |
刊名 | Tribology International |
出版日期 | 2019-01 |
期号 | 132页码:99-107 |
ISSN号 | 0301-679X |
关键词 | Frictional anisotropy Biomimetic microstructures with topographic orientation Directional driving 3D printing |
DOI | 10.1016/j.triboint.2018.12.010 |
英文摘要 | Friction anisotropic surfaces with oriented micro-/nanostructures are widely spread in biological systems and play important roles for effective locomotion or transporting items. Herein, 3D printing was employed to build the structures mimicking the hook-like features of the Filefish skin surface having typical interfacial anisotropy. Friction tests revealed that the surface withflexible supporting layer (similar to biological prototype) had low friction force in both sliding directions, but exhibited larger frictional anisotropy in comparison with the surface with rigid supporting layer. Interestingly, the anisotropic friction of the 3D printed surfaces led to directional driving when oscillated in contact with other surfaces. This effect makes biomimetic surfaces with oriented surface structures promising candidates for directional actuation, intelligent sensors and specific tribological applications. |
语种 | 英语 |
出版者 | Elsevier |
源URL | [http://ir.licp.cn/handle/362003/25606] |
专题 | 兰州化学物理研究所_固体润滑国家重点实验室 |
通讯作者 | Wang XL(王晓龙) |
作者单位 | 1.Shihezi University 2.Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences 3.University of Chinese Academy of Sciences 4.Zoological Institute of the University of Kiel 5.Yiwu R&D Centre for Functional Materials |
推荐引用方式 GB/T 7714 | Ji ZY,Yan CY,Ma SH,et al. 3D printing of bioinspired topographically oriented surfaces with frictional anisotropy for directional driving[J]. Tribology International,2019(132):99-107. |
APA | Ji ZY.,Yan CY.,Ma SH.,Stanislav Gorb.,Jia X.,...&Yu B.(2019).3D printing of bioinspired topographically oriented surfaces with frictional anisotropy for directional driving.Tribology International(132),99-107. |
MLA | Ji ZY,et al."3D printing of bioinspired topographically oriented surfaces with frictional anisotropy for directional driving".Tribology International .132(2019):99-107. |
入库方式: OAI收割
来源:兰州化学物理研究所
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。