Al含量对镍基单晶合金组织及持久性能的影响
文献类型:期刊论文
作者 | 孙跃军; 葛艳辉; 张军 |
刊名 | 热加工工艺 |
出版日期 | 2011 |
卷号 | 40期号:2页码:40-43 |
ISSN号 | 1001-3814 |
关键词 | 镍基单晶合金 铝含量 显微组织 持久性能 |
其他题名 | Effect of Al Content on Microstructure and Stress Rupture Properties of Nickel Based Single Crystal Superalloy |
通讯作者 | 孙跃军 |
产权排序 | 辽宁工程技术大学材料科学与工程学院;中平能化集团天工机械制造有限公司;中国科学院力学研究所 |
合作状况 | 国内 |
中文摘要 | 研究了铝含量对一种镍基单晶合金铸态和热处理态显微组织的影响,测试了单晶合金的高温持久性能,利用金相显微镜,SEM,TEM,XRD等考察了持久断裂试样的微观形貌.结果表明,单晶合金的铸态组织由粗大的γ',细小的γ'和γ组成,随Al含量的增加,粗大的γ'相数量增多,尺寸增大.固溶处理不能使粗大的γ'完全固溶,持久断裂裂纹主要在粗大的γ'/γ界面产生,并沿γ'/γ界面扩展,严重损伤合金的高温持久性能 |
英文摘要 | The effects of Al content on the microstructure of as-cast and heat treatment specimens were investigated.The stress rupture of the alloy at high temperature was measured and the microstructure of stress rupture specimens was observed by SEM,EDS,and XRD.The results show that the as-cast microstructure of the alloy is composed of coarsening γ’,fine γ’ and γ.With the increase of Al content,the more coarsening γ’ appears in the alloy and cannot be dissolved into γ matrix completely during solid solution heat-treating.The observation of microstructure indicates that the micro-cracks occur mainly at the coarsening γ’/γ interface during stress rupturing measuring and extends along γ’/γ interface,all these are harmful to the high temperature properties of the alloy |
学科主题 | 力学 |
收录类别 | CSCD |
原文出处 | http://epub3.cnki.net/grid2008/brief/detailj.aspx?filename=SJGY201102011&dbname=CJFQ2011 |
语种 | 中文 |
CSCD记录号 | CSCD:4135191 |
公开日期 | 2012-04-01 |
源URL | [http://dspace.imech.ac.cn/handle/311007/45039] |
专题 | 力学研究所_水动力学与海洋工程重点实验室(2009-2011) |
推荐引用方式 GB/T 7714 | 孙跃军,葛艳辉,张军. Al含量对镍基单晶合金组织及持久性能的影响[J]. 热加工工艺,2011,40(2):40-43. |
APA | 孙跃军,葛艳辉,&张军.(2011).Al含量对镍基单晶合金组织及持久性能的影响.热加工工艺,40(2),40-43. |
MLA | 孙跃军,et al."Al含量对镍基单晶合金组织及持久性能的影响".热加工工艺 40.2(2011):40-43. |
入库方式: OAI收割
来源:力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。