Edge Effect in RTM Processes Under Constant Pressure Injection Conditions
文献类型：期刊论文
| 作者 | Yang JY ; Jia YX ; Ding YY ; He HD ; Shi TF ; An LJ |
| 刊名 | journal of applied polymer science
 |
| 出版日期 | 2010 |
| 卷号 | 118期号:2页码:1014-1019 |
| 关键词 | TRANSFER MOLDING PROCESSES PERMEABLE BOUNDARY POROUS-MEDIUM FLOW SIMULATION TRACKING PREFORM |
| ISSN号 | 0021-8995 |
| 通讯作者 | jia yx |
| 中文摘要 | in resin transfer molding processes, the edge effect caused by the nonuniformity of permeability between fiber preform and edge channel may disrupt resin flow patterns and often results in the incomplete wetting of fiber preform, the formation of dry spots, and other defects in final composite materials. so a numerical simulation algorithm is developed to analyze the complex mold-filling process with edge effect. the newly modified governing equations involving the effect of mold cavity thickness on flow patterns and the volume-averaging momentum equations containing viscous and inertia terms are adopted to describe the fluid flow in the edge area and in the fiber preform, respectively. the volume of fluid (vof) method is applied to tracking the free interface between the two types of fluids, namely the resin and the air. under constant pressure injection conditions, the effects of transverse permeability, edge channel width, and mold cavity thickness on flow patterns are analyzed. the results demonstrate that the transverse flow is not only affected by the transverse permeability and the edge channel width but also by the mold cavity thickness. the simulated results are in agreement with the experimental results. (c) 2010 wiley periodicals, inc. j appl polym sci 118: 1014-1019, 2010 |
| 收录类别 | SCI收录期刊论文 |
| 语种 | 英语 |
| WOS记录号 | WOS:000280748400045 |
| 公开日期 | 2012-04-26 |
| 源URL | [http://ir.ciac.jl.cn/handle/322003/43538]  |
| 专题 | 长春应用化学研究所_长春应用化学研究所知识产出_期刊论文 |
| 推荐引用方式 GB/T 7714 | Yang JY,Jia YX,Ding YY,et al. Edge Effect in RTM Processes Under Constant Pressure Injection Conditions[J]. journal of applied polymer science,2010,118(2):1014-1019. |
| APA | Yang JY,Jia YX,Ding YY,He HD,Shi TF,&An LJ.(2010).Edge Effect in RTM Processes Under Constant Pressure Injection Conditions.journal of applied polymer science,118(2),1014-1019. |
| MLA | Yang JY,et al."Edge Effect in RTM Processes Under Constant Pressure Injection Conditions".journal of applied polymer science 118.2(2010):1014-1019. |
入库方式： OAI收割
来源：长春应用化学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。