热门
Microstructure and mechanical properties of CrN coating deposited by arc ion plating on Ti6Al4V substrate
文献类型：期刊论文
| 作者 | Z. K. Chang ; X. S. Wan ; Z. L. Pei ; J. Gong ; C. Sun |
| 刊名 | Surface & Coatings Technology
 |
| 出版日期 | 2011 |
| 卷号 | 205期号:19页码:4690-4696 |
| 关键词 | Knoop hardness test Interfaces Wear Arc ion plating CrN coatings Ti6Al4V alloy nitride thin-films ti-6al-4v alloy hard coatings wear behavior tribological properties residual-stress sliding contact bias voltage n coatings surface |
| ISSN号 | 0257-8972 |
| 中文摘要 | CrN coatings have been grown by arc ion plating (AIP) onto Ti6Al4V alloy substrate at various nitrogen pressures (P(N2)). The goals of this investigation are to study the influence of nitrogen pressure content on the composition, structure and mechanical properties of AIP CrN coatings, as well as their tribological properties. With an increase of P(N2), the main phases in the coatings changed from CrN + Cr(2)N + Cr to CrN, and the texture of CrN was transformed from CrN (111)-oriented to (220)-oriented. Furthermore, the multi-layers including a metal Cr layer, a Cr(2)N layer and a CrN layer were observed by cross-sectional TEM (XTEM), besides an "unbalanced" state transition layer at the interface of CrN/substrate which was analyzed by nucleation thermodynamics subsequently. An increase in nitrogen pressure also resulted in a change of micro-hardness due to the variation in composition and structure. Finally, the tribological properties of the Ti6Al4V substrate and the CrN/Ti6Al4V coating system have also been explored, which shows that CrN coatings can act as good wear resistance layer for Ti6Al4V substrate. (C) 2011 Elsevier B.V. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/30249]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Z. K. Chang,X. S. Wan,Z. L. Pei,et al. Microstructure and mechanical properties of CrN coating deposited by arc ion plating on Ti6Al4V substrate[J]. Surface & Coatings Technology,2011,205(19):4690-4696. |
| APA | Z. K. Chang,X. S. Wan,Z. L. Pei,J. Gong,&C. Sun.(2011).Microstructure and mechanical properties of CrN coating deposited by arc ion plating on Ti6Al4V substrate.Surface & Coatings Technology,205(19),4690-4696. |
| MLA | Z. K. Chang,et al."Microstructure and mechanical properties of CrN coating deposited by arc ion plating on Ti6Al4V substrate".Surface & Coatings Technology 205.19(2011):4690-4696. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。