Internal Stress Distribution Model of the Magnetomechanical Hysteresis of Fe-Cr-Al Based Alloys
文献类型：期刊论文
| 作者 | R. R. Lin ; W. Jin ; M. Z. Cao ; R. Yang |
| 刊名 | Journal of Materials Science & Technology
 |
| 出版日期 | 2011 |
| 卷号 | 27期号:5页码:471-474 |
| 关键词 | Magnetomechanical damping Static load Smith-Birchak model 3-point bending |
| ISSN号 | 1005-0302 |
| 中文摘要 | The damping capacities of Fe-13Cr-6Al, Fe-12Cr-1Mo-6Al and Fe-12Cr-1Mn-6Al (at.%) alloys as a function of strain-amplitude tested in a given static load are characterized in the 3-point bending deformation mode. After being modified, Smith-Birchak model is applied to describe the results. It is shown that the modified model agrees with the experimental data much better than the original one. Finally, the influences of stress factors on the damping capacity of the alloys are analyzed. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/30503]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | R. R. Lin,W. Jin,M. Z. Cao,et al. Internal Stress Distribution Model of the Magnetomechanical Hysteresis of Fe-Cr-Al Based Alloys[J]. Journal of Materials Science & Technology,2011,27(5):471-474. |
| APA | R. R. Lin,W. Jin,M. Z. Cao,&R. Yang.(2011).Internal Stress Distribution Model of the Magnetomechanical Hysteresis of Fe-Cr-Al Based Alloys.Journal of Materials Science & Technology,27(5),471-474. |
| MLA | R. R. Lin,et al."Internal Stress Distribution Model of the Magnetomechanical Hysteresis of Fe-Cr-Al Based Alloys".Journal of Materials Science & Technology 27.5(2011):471-474. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。