Microstructures and Mechanical Properties of Al/Mg Alloy Multilayered Composites Produced by Accumulative Roll Bonding
文献类型：期刊论文
| 作者 | H. S. Liu ; B. Zhang ; G. P. Zhang |
| 刊名 | Journal of Materials Science & Technology
 |
| 出版日期 | 2011 |
| 卷号 | 27期号:1页码:15-21 |
| 关键词 | Accumulative roll bonding (ARB) Al/Mg alloy multilayered composite Ultra-fine grains Hardness Bending properties severe plastic-deformation arb process cu-ag evolution strength |
| ISSN号 | 1005-0302 |
| 中文摘要 | Al/Mg alloy multilayered composites were produced successfully at the lower temperature (280 degrees C) by accumulative roll bonding (ARB) processing technique. The microstructures of Al and Mg alloy layers were characterized by scanning electron microscopy and transmission electron microscopy. Vickers hardness and three-point bending tests were conducted to investigate mechanical properties of the composites. It is found that Vickers hardness, bending strength and stiffness modulus of the Al/Mg alloy multilayered composite increase with increasing the ARB pass. De lamination and crack propagation along the interface are the two main failure modes of the multilayered composite subjected to bending load. Strengthening and fracture mechanisms of the composite are analyzed. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/30530]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | H. S. Liu,B. Zhang,G. P. Zhang. Microstructures and Mechanical Properties of Al/Mg Alloy Multilayered Composites Produced by Accumulative Roll Bonding[J]. Journal of Materials Science & Technology,2011,27(1):15-21. |
| APA | H. S. Liu,B. Zhang,&G. P. Zhang.(2011).Microstructures and Mechanical Properties of Al/Mg Alloy Multilayered Composites Produced by Accumulative Roll Bonding.Journal of Materials Science & Technology,27(1),15-21. |
| MLA | H. S. Liu,et al."Microstructures and Mechanical Properties of Al/Mg Alloy Multilayered Composites Produced by Accumulative Roll Bonding".Journal of Materials Science & Technology 27.1(2011):15-21. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。