A novel ultrafine-grained Ni(3)Al with increased cyclic oxidation resistance
文献类型：期刊论文
| 作者 | X. Peng ; M. Li ; F. Wang |
| 刊名 | Corrosion Science
 |
| 出版日期 | 2011 |
| 卷号 | 53期号:4页码:1616-1620 |
| 关键词 | Alloy Intermetallics SEM TEM XRD Oxidation high-temperature oxidation transient oxidation composite coatings alumina scales oxide scale behavior alloys cr yttrium transformations |
| ISSN号 | 0010-938X |
| 中文摘要 | An ultrafine-grained (UFG) Ni(3)Al was fabricated by annealing an electrodeposited Ni-Al composite in vacuum at 600 degrees C for 2 h. The UFG Ni(3)Al, compared to a compositional-similar but coarse-grained (CG) alloy prepared by arc-melting, exhibited a greatly increased cyclic oxidation resistance at 900 degrees C. Microstructural investigation showed that the CG alloy grew a scale with a high susceptibility to buckling and cracking because of the formation of large voids at the scale/metal interface, but that the UFG alloy grew an adherent scale, because its typical structure prevented the formation of the interface void during oxidation. (C) 2011 Elsevier Ltd. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/30621]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | X. Peng,M. Li,F. Wang. A novel ultrafine-grained Ni(3)Al with increased cyclic oxidation resistance[J]. Corrosion Science,2011,53(4):1616-1620. |
| APA | X. Peng,M. Li,&F. Wang.(2011).A novel ultrafine-grained Ni(3)Al with increased cyclic oxidation resistance.Corrosion Science,53(4),1616-1620. |
| MLA | X. Peng,et al."A novel ultrafine-grained Ni(3)Al with increased cyclic oxidation resistance".Corrosion Science 53.4(2011):1616-1620. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。