Effects of processing route on texture and mechanical properties of WZ62 alloy
文献类型：期刊论文
| 作者 | B. Q. Shi ; R. S. Chen ; W. Ke |
| 刊名 | Transactions of Nonferrous Metals Society of China
 |
| 出版日期 | 2011 |
| 卷号 | 21期号:4页码:830-835 |
| 关键词 | magnesium alloy Mg-Y-Zn alloy equal-cannel-angular-extrusion (ECAE) texture control high-temperature deformation period ordered structure dynamic recrystallization y-alloy magnesium strength behavior |
| ISSN号 | 1003-6326 |
| 中文摘要 | Mg-6.6%Y-2.3% Zn (WZ62, mass fraction) magnesium alloys were fabricated by equal-channel-angular-extrusion (ECAE), and ECAE followed by forging processing, respectively. The "necklace" structure that is composed of fine recrystallized and coarse initial grains was found. The process of dynamic recrystallization (DRX) is associated with the strain localization. With increasing ECAE passes, the tensile test results reveal that both the strength and elongation are enhanced. A typical non-basal texture component in the (0002) pole figures with tilted peaks at about 45 was observed. After ECAE followed by forging processing, the strength increases greatly with sacrificed ductility. That is attributed to the change in the texture: the majority of basal planes is rotated to be normal to the normal direction. The non-basal texture induced by ECAE is modified by the secondary forging processing. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/30656]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | B. Q. Shi,R. S. Chen,W. Ke. Effects of processing route on texture and mechanical properties of WZ62 alloy[J]. Transactions of Nonferrous Metals Society of China,2011,21(4):830-835. |
| APA | B. Q. Shi,R. S. Chen,&W. Ke.(2011).Effects of processing route on texture and mechanical properties of WZ62 alloy.Transactions of Nonferrous Metals Society of China,21(4),830-835. |
| MLA | B. Q. Shi,et al."Effects of processing route on texture and mechanical properties of WZ62 alloy".Transactions of Nonferrous Metals Society of China 21.4(2011):830-835. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。