The influence of tempering temperature on the reversed austenite formation and tensile properties in Fe-13%Cr-4%Ni-Mo low carbon martensite stainless steels
文献类型：期刊论文
| 作者 | Y. Y. Song ; X. Y. Li ; L. J. Rong ; Y. Y. Li |
| 刊名 | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
 |
| 出版日期 | 2011 |
| 卷号 | 528期号:12页码:4075-4079 |
| 关键词 | X-ray diffraction Mechanical characterization Austenite Martensite Phase transformation maraging-steel reverted austenite retained austenite |
| ISSN号 | 0921-5093 |
| 中文摘要 | The influence of tempering temperature on the reversed austenite formation and tensile properties are investigated in Fe-13%Cr-4%Ni-Mo low carbon martensite stainless steel in the temperature range of 550-950 degrees C. It is found that at the temperatures below 680 degrees C, the reversed austenite formation occurs by diffusion. Amount of the reversed austenite is determined I:IN the tempering temperature and the holding time. The segregation of Ni is the main reason for the stability of the reversed austenite. When the temperatures are above 680 degrees C, the reversed austenite formation proceeds by diffusionless. The reversed austenite will transform back to martensite after cooled to room temperature. The tensile properties are most strongly influenced by the amount of the reversed austenite obtained at room temperature. The excellent combination of good strength and ductility is at 610 degrees C. (C) 2011 Elsevier B.V. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/30670]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Y. Y. Song,X. Y. Li,L. J. Rong,et al. The influence of tempering temperature on the reversed austenite formation and tensile properties in Fe-13%Cr-4%Ni-Mo low carbon martensite stainless steels[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2011,528(12):4075-4079. |
| APA | Y. Y. Song,X. Y. Li,L. J. Rong,&Y. Y. Li.(2011).The influence of tempering temperature on the reversed austenite formation and tensile properties in Fe-13%Cr-4%Ni-Mo low carbon martensite stainless steels.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,528(12),4075-4079. |
| MLA | Y. Y. Song,et al."The influence of tempering temperature on the reversed austenite formation and tensile properties in Fe-13%Cr-4%Ni-Mo low carbon martensite stainless steels".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 528.12(2011):4075-4079. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。