Finite element analyses for design evaluation of biodegradable magnesium alloy stents in arterial vessels
文献类型：期刊论文
| 作者 | W. Wu ; D. Gastaldi ; K. Yang ; L. L. Tan ; L. Petrini ; F. Migliavacca |
| 刊名 | Materials Science and Engineering B-Advanced Functional Solid-State Materials
 |
| 出版日期 | 2011 |
| 卷号 | 176期号:20页码:1733-1740 |
| 关键词 | Stent Finite element Degradable materials Continuum damage mechanics Corrosion stress-corrosion cracking coronary-artery flexibility fatigue |
| ISSN号 | 0921-5107 |
| 中文摘要 | Biodegradable magnesium alloy stents (MAS) can provide a great benefit for diseased vessels and avoid the long-term incompatible interactions between vessels and permanent stent platforms. However, the existing MAS showed insufficient scaffolding to the target vessels due to short degradation time. In this study, a three dimensional finite element model combined with a degradable material model of AZ31 (Al 0.03, Zn 0.01, Mn 0.002 and Mg balance, mass percentage) was applied to three different MAS designs including an already implanted stent (Stent A), an optimized design (Stent B) and a patented stent design (Stent C). One ring of each design was implanted through a simulation in a vessel model then degraded with the changing interaction between outer stent surface and the vessel. Results showed that a proper stent design (Stent B) can lead to an increase of nearly 120% in half normalized recoil time of the vessel compared to the Stent A; moreover, the expectation that the MAS design, with more mass and optimized mechanical properties, can increase scaffolding time was verified numerically. The Stent C has more materials than Stent B; however, it only increased the half normalized recoil time of the vessel by nearly 50% compared to the Stent A because of much higher stress concentration than that of Stent B. The 3D model can provide a convenient design and testing tool for novel magnesium alloy stents. (C) 2011 Elsevier B.V. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/30777]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | W. Wu,D. Gastaldi,K. Yang,et al. Finite element analyses for design evaluation of biodegradable magnesium alloy stents in arterial vessels[J]. Materials Science and Engineering B-Advanced Functional Solid-State Materials,2011,176(20):1733-1740. |
| APA | W. Wu,D. Gastaldi,K. Yang,L. L. Tan,L. Petrini,&F. Migliavacca.(2011).Finite element analyses for design evaluation of biodegradable magnesium alloy stents in arterial vessels.Materials Science and Engineering B-Advanced Functional Solid-State Materials,176(20),1733-1740. |
| MLA | W. Wu,et al."Finite element analyses for design evaluation of biodegradable magnesium alloy stents in arterial vessels".Materials Science and Engineering B-Advanced Functional Solid-State Materials 176.20(2011):1733-1740. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。