A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods
文献类型：期刊论文
| 作者 | X. B. Zhu ; Z. Lu ; B. Wei ; X. Q. Huang ; Y. H. Zhang ; W. H. Su |
| 刊名 | Journal of Power Sources
 |
| 出版日期 | 2011 |
| 卷号 | 196期号:2页码:729-733 |
| 关键词 | Symmetrical solid oxide fuel cells Perovskite oxide Dry-pressing Wet impregnation Nickel/ceria catalyst anode electrodes la0.75sr0.25cr0.5mn0.5o3-delta composites cathode |
| ISSN号 | 0378-7753 |
| 中文摘要 | In this study, a simple and cost-effective dry-pressing method has been used to fabricate a symmetrical solid oxide fuel cell (SOFC) where the dense yttria-stabilized zirconia (YSZ) electrolyte film is sandwiched between two symmetrical porous YSZ layers in which La(0.75)Sr(0.25)Cr(0.5)Mn(0.5)O(3-delta) (LSCM) based anode and cathode are incorporated using wet impregnation techniques. The maximum power densities (P(max)) of a single cell with 32 wt.% LSCM impregnated YSZ anode and cathode reach 333 and 265 mW cm(-2) at 900 degrees C in dry H(2) and CH(4), respectively. The cell performance is further improved with additional impregnation of a small amount of Sm-doped CeO(2) (SDC) or Ni. When 6 wt.% Ni as catalyst is added to both the anode and cathode. P(max) values of 559 and 547 mW cm(-2) can be achieved, which are better than with SDC. The effect of Ni on the cathode performance is also investigated by impedance spectra analysis. (C) 2010 Elsevier B.V. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/30998]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | X. B. Zhu,Z. Lu,B. Wei,et al. A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods[J]. Journal of Power Sources,2011,196(2):729-733. |
| APA | X. B. Zhu,Z. Lu,B. Wei,X. Q. Huang,Y. H. Zhang,&W. H. Su.(2011).A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods.Journal of Power Sources,196(2),729-733. |
| MLA | X. B. Zhu,et al."A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods".Journal of Power Sources 196.2(2011):729-733. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。