LaCrO(3)-based coatings deposited by high-energy micro-arc alloying process on a ferritic stainless steel interconnect material
文献类型：期刊论文
| 作者 | Z. J. Feng ; C. L. Zeng |
| 刊名 | Journal of Power Sources
 |
| 出版日期 | 2010 |
| 卷号 | 195期号:13页码:4242-4246 |
| ISSN号 | 0378-7753 |
| 关键词 | Solid oxide fuel cells Ferritic metallic interconnect High-energy micro-arc alloying technique Lanthanum chromite Oxidation Contact resistance oxide fuel-cells composite coatings oxidation chromia cathode |
| 中文摘要 | Currently used ferritic stainless steel interconnects are unsuitable for practical applications in solid oxide fuel cells operated at intermediate temperatures due to chromium volatility, poisoning of the cathode material, rapidly decreasing electrical conductivity and a low oxidation resistance. To overcome these problems, a novel, simple and cost-effective high-energy micro-arc alloying (HEMAA) process is proposed to prepare LaCrO(3)-based coatings for the type 430 stainless steel interconnects. However, it is much difficult to deposit an oxide coating by HEMAA than a metallic coating due to the high brittleness of oxide electrodes for deposition. Therefore, a Cr-alloying layer is firstly obtained on the alloy surface by HEMAA using a Cr electrode rod, followed by a LaCrO(3)-based coating using an electrode rod of LaCrO(3)-20 wt.%Ni, with a metallurgical bonding between the coating and the substrate. The preliminary oxidation tests at 850 degrees C in air indicate that the LaCrO(3)-based coatings showed a three-layered microstructure with a NiFe(2)O(4) outer layer, a thick LaCrO(3) sub-layer and a thin Cr(2)O(3)-rich inner layer, which thereby possesses an excellent protectiveness to the substrate alloy and a low electrical contact resistance. (C) 2010 Elsevier B.V. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/31108]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Z. J. Feng,C. L. Zeng. LaCrO(3)-based coatings deposited by high-energy micro-arc alloying process on a ferritic stainless steel interconnect material[J]. Journal of Power Sources,2010,195(13):4242-4246. |
| APA | Z. J. Feng,&C. L. Zeng.(2010).LaCrO(3)-based coatings deposited by high-energy micro-arc alloying process on a ferritic stainless steel interconnect material.Journal of Power Sources,195(13),4242-4246. |
| MLA | Z. J. Feng,et al."LaCrO(3)-based coatings deposited by high-energy micro-arc alloying process on a ferritic stainless steel interconnect material".Journal of Power Sources 195.13(2010):4242-4246. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。