Clustering model on the tensile strength of PM processed SiCp/Al composites
文献类型:期刊论文
作者 | Z. Y. Liu ; Q. Z. Wang ; B. L. Xiao ; Z. Y. Ma |
刊名 | Composites Part a-Applied Science and Manufacturing
![]() |
出版日期 | 2010 |
卷号 | 41期号:11页码:1686-1692 |
关键词 | Metal-matrix composites (MMCs) Mechanical properties Analytical modeling Powder processing metal-matrix composites particle-size ratio mechanical-properties behavior powder microstructures parameters extrusion |
ISSN号 | 1359-835X |
中文摘要 | Reinforcement clusters in the powder metallurgy (PM) processed SiCp/Al composites were divided into two types: the non-contacted clusters and the contacted clusters. Based on this conception and the critical volume fraction of reinforcement, a cluster strength model was proposed to calculate the strength of the PM SiCp/Al composites with clustering. The calculated strengths of the as-pressed and the as-extruded SiCp/Al composites were in good agreement with the experimental results. The model could also quantitatively explain the phenomena that the strength of the PM composites began to decrease above some volume fraction of reinforcement. (C) 2010 Elsevier Ltd. All rights reserved. |
原文出处 | |
公开日期 | 2012-04-13 |
源URL | [http://210.72.142.130/handle/321006/31333] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | Z. Y. Liu,Q. Z. Wang,B. L. Xiao,et al. Clustering model on the tensile strength of PM processed SiCp/Al composites[J]. Composites Part a-Applied Science and Manufacturing,2010,41(11):1686-1692. |
APA | Z. Y. Liu,Q. Z. Wang,B. L. Xiao,&Z. Y. Ma.(2010).Clustering model on the tensile strength of PM processed SiCp/Al composites.Composites Part a-Applied Science and Manufacturing,41(11),1686-1692. |
MLA | Z. Y. Liu,et al."Clustering model on the tensile strength of PM processed SiCp/Al composites".Composites Part a-Applied Science and Manufacturing 41.11(2010):1686-1692. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。