Weld Shape Variation and Electrode Oxidation Behavior under Ar-(Ar-CO(2)) Double Shielded GTA Welding
文献类型：期刊论文
| 作者 | S. P. Lu ; H. Fujii ; K. Nogi |
| 刊名 | Journal of Materials Science & Technology
 |
| 出版日期 | 2010 |
| 卷号 | 26期号:2页码:170-176 |
| 关键词 | Double shielding Weld shape Marangoni convection Gas tungsten arc welding gas tungsten arc fusion zone geometry marangoni convection activating flux stainless-steel oxide fluxes deep penetration pool flow tig |
| ISSN号 | 1005-0302 |
| 中文摘要 | Double shielded gas tungsten arc welding (GTAW, also known as tungsten inert gas (TIG) welding) of an SUS304 stainless steel with pure inert argon as the inner layer shielding and the Ar-CO(2) or CO(2) active gas as the out layer shielding was proposed in this study to investigate its effect on the tungsten electrode protection and the weld shape variation. The experimental results showed that the inner inert argon gas can successfully prevent the outer layer active gas from contacting and oxidizing the tungsten electrode during the welding process. Active gas, carbon dioxide, in the outer layer shielding is decomposed in the arc and dissolves in the liquid pool, which effectively adjusts the active element, oxygen, content in the weld metal. When the weld metal oxygen content is over 70x10(-6), the surface-tension induced Marangoni convection changes from outward into inward, and the weld shape varies from a wide shallow one to a narrow deep one. The effect of the inner layer gas flow rate on the weld bead morphology and the weld shape was investigated systematically. The results show that when the flow rate of the inner argon shielding gas is too low, the weld bead is easily oxidized and the weld shape is wide and shallow. A heavy continuous oxide layer on the liquid pool is a barrier to the liquid pool movement. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/31344]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | S. P. Lu,H. Fujii,K. Nogi. Weld Shape Variation and Electrode Oxidation Behavior under Ar-(Ar-CO(2)) Double Shielded GTA Welding[J]. Journal of Materials Science & Technology,2010,26(2):170-176. |
| APA | S. P. Lu,H. Fujii,&K. Nogi.(2010).Weld Shape Variation and Electrode Oxidation Behavior under Ar-(Ar-CO(2)) Double Shielded GTA Welding.Journal of Materials Science & Technology,26(2),170-176. |
| MLA | S. P. Lu,et al."Weld Shape Variation and Electrode Oxidation Behavior under Ar-(Ar-CO(2)) Double Shielded GTA Welding".Journal of Materials Science & Technology 26.2(2010):170-176. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。