A New Way to Improve Glass-Forming Ability by Controlling the Preparation Conditions of Bulk Metallic Glass
文献类型：期刊论文
| 作者 | J. Mao ; H. F. Zhang ; H. M. Fu ; A. M. Wang ; H. Li ; Z. Q. Hu |
| 刊名 | Advanced Engineering Materials
 |
| 出版日期 | 2010 |
| 卷号 | 12期号:3页码:170-175 |
| 关键词 | supercooled liquid region ni amorphous-alloys thermal-stability mechanical-properties interfacial energies oxygen impurity al alloy crystallization wettability temperature |
| ISSN号 | 1438-1656 |
| 中文摘要 | The effects of mold preheating temperature on the glass-forming ability of Zr(64.9)Al(7.9)Ni(10.7)Cu(16.5) and Zr(47)Cu(37.5)Ag(7.5)Al(8) alloys are investigated using traditional copper mold casting. It is found that there exists an optimum mold temperature for glass-forming alloy systems. For the two Zr-based alloy systems studied the optimum mold temperature is 353 K. This is explained from the perspectives of heat transfer efficiency and the wettability between liquid alloy and copper mold. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/31371]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | J. Mao,H. F. Zhang,H. M. Fu,et al. A New Way to Improve Glass-Forming Ability by Controlling the Preparation Conditions of Bulk Metallic Glass[J]. Advanced Engineering Materials,2010,12(3):170-175. |
| APA | J. Mao,H. F. Zhang,H. M. Fu,A. M. Wang,H. Li,&Z. Q. Hu.(2010).A New Way to Improve Glass-Forming Ability by Controlling the Preparation Conditions of Bulk Metallic Glass.Advanced Engineering Materials,12(3),170-175. |
| MLA | J. Mao,et al."A New Way to Improve Glass-Forming Ability by Controlling the Preparation Conditions of Bulk Metallic Glass".Advanced Engineering Materials 12.3(2010):170-175. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。