热门
Effect of delta ferrite on impact properties of low carbon 13Cr-4Ni martensitic stainless steel
文献类型：期刊论文
| 作者 | P. Wang ; S. P. Lu ; N. M. Xiao ; D. Z. Li ; Y. Y. Li |
| 刊名 | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
 |
| 出版日期 | 2010 |
| 卷号 | 527期号:13-14页码:3210-3216 |
| 关键词 | Low carbon martensitic stainless steel Delta ferrite Impact properties Fracture mechanism weld metals phase-transformation fracture-toughness microstructure transition |
| ISSN号 | 0921-5093 |
| 中文摘要 | The effect of delta ferrite on impact properties of low carbon 13Cr-4Ni martensitic stainless steel was studied by instrumented Charpy impact, SEM fractographic analysis and EDS. The experimental results indicated the presence of delta ferrite did not change the upper and lower shelf energy of the steel apparently, while lowered the impact energy remarkably in the transition temperature range and raised the ductile-to-brittle transition temperature of the material. At 0 degrees C, which is in the ductile-to-brittle transition temperature range, the presence of delta ferrite lowered both the crack initiation and propagation energy during the impact progress and changed the fracture mode from dimple to quasi-cleavage as the delta ferrite content increases to 7.8%. It is suggested that in the ductile-to-brittle transition temperature range the cracks are initiated in the soft delta ferrite region, which lowers the maximum load and crack initiation energy. Additionally, when the cracks initiating in delta ferrite extend to the boundaries between the delta ferrite and the matrix, they trigger brittle fracture in the tempered martensite matrix, which decreases the crack propagation energy dramatically. In the upper shelf temperature range, the delta ferrite phase has a good plastic property, which counteracts the deleterious effect caused by its lower strength during the impacting. In the lower shelf temperature range, both delta ferrite and martensite fracture in cleavage mode, thus the presence of delta ferrite cannot change the impact energy significantly. (C) 2010 Elsevier B.V. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/31505]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | P. Wang,S. P. Lu,N. M. Xiao,et al. Effect of delta ferrite on impact properties of low carbon 13Cr-4Ni martensitic stainless steel[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2010,527(13-14):3210-3216. |
| APA | P. Wang,S. P. Lu,N. M. Xiao,D. Z. Li,&Y. Y. Li.(2010).Effect of delta ferrite on impact properties of low carbon 13Cr-4Ni martensitic stainless steel.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,527(13-14),3210-3216. |
| MLA | P. Wang,et al."Effect of delta ferrite on impact properties of low carbon 13Cr-4Ni martensitic stainless steel".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 527.13-14(2010):3210-3216. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。