Hot die forging process optimization of superalloy IN718 turbine disc using processing map and finite element method
文献类型:期刊论文
作者 | H. Y. Zhang ; S. H. Zhang ; Z. X. Li ; M. Cheng |
刊名 | Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture |
出版日期 | 2010 |
卷号 | 224期号:B1页码:103-110 |
ISSN号 | 0954-4054 |
关键词 | superalloy IN718 turbine disc processing map finite element method microstructure simulation high-temperature deformation metadynamic recrystallization microstructural evolution flow behavior inconel-718 working simulation in-718 |
中文摘要 | The deformation constitutive equation and the microstructure models in terms of critical strain, dynamic recrystallization, and grain growth for superalloy IN718 have been established based on the isothermal compression tests. Non-isothermal upsetting experiments have been carried out to refine and validate the microstructure evolution models. A processing map has been generated using the flow stress data obtained from the isothermal compressing tests. According to the processing map, the Optimum hot working parameters for superalloy IN718 have been obtained. The effect of process parameters on the microstructure development during the hot die forging of IN718 turbine disc have been investigated through Coupling the microstructure evolution prediction system developed with a commercial FE software, MSC.Superform. To design the hot die forging of IN718 turbine disc, a uniform Function Of microstructure has been proposed as the goal function. On the basis of simulation results, the optimum hot die forging parameters have been obtained. |
原文出处 | |
公开日期 | 2012-04-13 |
源URL | [http://210.72.142.130/handle/321006/31702] |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | H. Y. Zhang,S. H. Zhang,Z. X. Li,et al. Hot die forging process optimization of superalloy IN718 turbine disc using processing map and finite element method[J]. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture,2010,224(B1):103-110. |
APA | H. Y. Zhang,S. H. Zhang,Z. X. Li,&M. Cheng.(2010).Hot die forging process optimization of superalloy IN718 turbine disc using processing map and finite element method.Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture,224(B1),103-110. |
MLA | H. Y. Zhang,et al."Hot die forging process optimization of superalloy IN718 turbine disc using processing map and finite element method".Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture 224.B1(2010):103-110. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。