中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Analysis on shear deformation mechanism of metallic glass under confined bending test

文献类型:期刊论文

作者J. X. Zhao ; F. F. Wu ; Z. F. Zhang
刊名Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
出版日期2010
卷号527期号:23页码:6224-6229
关键词Metallic glasses Confined bending test Plastic deformation Shear bands bulk amorphous-alloys fracture mechanisms melt extraction aspect ratio si-b plasticity behavior band composites plates
ISSN号0921-5093
中文摘要The shear deformation mechanism of Zr-based metallic glass under multiaxial loadings was systematically analyzed. By means of a confined bending test (CBT), some regular shear bands (SBs) initiated on the tension surface of the specimen and the metallic glass showed certain plastic deformation ability due to the stable propagation of SBs. Moreover, the angles between most of the SBs and the edges of the specimen were measured to be 55 degrees approximately. In order to reveal the shear deformation mechanism under the CBT, a nonlinear contact analytical model based on the finite element method (FEM) was proposed. Furthermore, according to the stress results obtained by simulations, a stress analysis method was employed to establish the relationship between the SB angle and the shear deformation process. Finally, compared with the experimental results above, it was concluded that the stress gradient produced by CBT was the key factor which could stimulate certain plasticity. Additionally, the initiation and propagation of the SBs were stable due to the multiaxial stress state in specimen. (C) 2010 Elsevier B.V. All rights reserved.
原文出处://WOS:000281264000015
公开日期2012-04-13
源URL[http://210.72.142.130/handle/321006/31743]  
专题金属研究所_中国科学院金属研究所
推荐引用方式
GB/T 7714
J. X. Zhao,F. F. Wu,Z. F. Zhang. Analysis on shear deformation mechanism of metallic glass under confined bending test[J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2010,527(23):6224-6229.
APA J. X. Zhao,F. F. Wu,&Z. F. Zhang.(2010).Analysis on shear deformation mechanism of metallic glass under confined bending test.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,527(23),6224-6229.
MLA J. X. Zhao,et al."Analysis on shear deformation mechanism of metallic glass under confined bending test".Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 527.23(2010):6224-6229.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。