Effect of Friction Stir Processing Procedures on Microstructure and Mechanical Properties of Mg-Al-Zn Casting
文献类型:期刊论文
作者 | A. H. Feng ; B. L. Xiao ; Z. Y. Ma ; R. S. Chen |
刊名 | Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science |
出版日期 | 2009 |
卷号 | 40A期号:10页码:2447-2456 |
ISSN号 | 1073-5623 |
关键词 | az91 magnesium alloy grain-size behavior refinement texture welds compression |
中文摘要 | Cast Mg-Al-Zn (AZ80) alloy was subjected to friction stir processing (FSP) with three different FSP procedures: single pass, single pass with a pre-solution treatment (pre-ST), and two pass. FSP resulted in remarkable grain refinement, significant breakup, and dissolution of the coarse, networklike Mg(17)Al(12) phase. While the single-pass FSP procedure produced a heterogeneous microstructure with Mg(17)Al(12) particle-rich bands, both the pre-ST FSP and the two-pass FSP procedures resulted in the generation of a uniform microstructure. The pre-ST FSP and two-pass FSP samples exhibited significantly enhanced strength and ductility due to remarkable grain refinement and dissolution of coarse Mg(17)Al(12) phase. A post-FSP aging resulted in the precipitation of fine Mg(17)Al(12) particle, thereby increasing the strength of the FSP samples. Among three FSP samples, the aged two-pass FSP sample exhibited the highest ultimate tensile strength (UTS) of 356 MPa and an elongation of 17 pct. |
原文出处 | |
公开日期 | 2012-04-13 |
源URL | [http://210.72.142.130/handle/321006/31896] |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | A. H. Feng,B. L. Xiao,Z. Y. Ma,et al. Effect of Friction Stir Processing Procedures on Microstructure and Mechanical Properties of Mg-Al-Zn Casting[J]. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science,2009,40A(10):2447-2456. |
APA | A. H. Feng,B. L. Xiao,Z. Y. Ma,&R. S. Chen.(2009).Effect of Friction Stir Processing Procedures on Microstructure and Mechanical Properties of Mg-Al-Zn Casting.Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science,40A(10),2447-2456. |
MLA | A. H. Feng,et al."Effect of Friction Stir Processing Procedures on Microstructure and Mechanical Properties of Mg-Al-Zn Casting".Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science 40A.10(2009):2447-2456. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。