Microstructure formation in rapidly solidified AISI 304 stainless steel strip
文献类型：期刊论文
| 作者 | J. W. Fu ; Y. S. Yang ; J. J. Guo ; J. C. Ma ; W. H. Tong |
| 刊名 | Ironmaking & Steelmaking
 |
| 出版日期 | 2009 |
| 卷号 | 36期号:3页码:230-233 |
| 关键词 | Stainless steel Strip casting Phase selection austenitic stainless-steels gamma-transition laser treatment alloy welds delta mode |
| ISSN号 | 0301-9233 |
| 中文摘要 | It is recognised that the solidification sequence in austenitic stainless steels during strip casting plays an important role in the tendency to hot cracking. In order to investigate the competitive growth between the stable ferrite phase and the metastable austenite phase to optimise the microstructures obtained by strip casting, experiments using symmetrical water-cooled copper mould were designed to simulate strip casting of AISI 304 stainless steels. It was found that primary phase transition from stable ferrite (delta) to metastable austenite (gamma) takes place adjacent to the surface of the strip due to high heat extraction rate. Phase selection theory, based on the criterion of the highest interface temperature, was used to explore the primary phase prediction. The experimental results are compared with the theoretical predictions. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/31911]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | J. W. Fu,Y. S. Yang,J. J. Guo,et al. Microstructure formation in rapidly solidified AISI 304 stainless steel strip[J]. Ironmaking & Steelmaking,2009,36(3):230-233. |
| APA | J. W. Fu,Y. S. Yang,J. J. Guo,J. C. Ma,&W. H. Tong.(2009).Microstructure formation in rapidly solidified AISI 304 stainless steel strip.Ironmaking & Steelmaking,36(3),230-233. |
| MLA | J. W. Fu,et al."Microstructure formation in rapidly solidified AISI 304 stainless steel strip".Ironmaking & Steelmaking 36.3(2009):230-233. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。