Modeling and experimental verification of tubular product formation during spray forming
文献类型：期刊论文
| 作者 | D. M. Liu ; J. Z. Zhao ; M. S. Li |
| 刊名 | Transactions of Nonferrous Metals Society of China
 |
| 出版日期 | 2009 |
| 卷号 | 19期号:3页码:661-667 |
| 关键词 | spray forming tube shape evolution modeling processing parameter ni superalloy rings thermal dynamics part 1 deposition alloy shape solidification deformation preforms |
| ISSN号 | 1003-6326 |
| 中文摘要 | A mathematical model is formulated to predict the shape evolution and the final geometry of a tubular product prepared by spray forming. The effects of several important processing parameters oil the shape evolution of the tube are investigated. The model is validated against experiments of spray formed large diameter tubes. The experimental and the modeling results show that there are three distinct regions in the preform, i.e., the left transition region, the middle uniform diameter region and the right transition region. The results show that the atomization parameters a(s) and b(s), traversing speed nu of the Substrate, the outer diameter D(0) of the substrate, and the initial deposition distance d(0) play important roles in the contour and the wall thickness of the spray formed tube. But the angular velocity omega of the substrate has little effect on the buildup of the deposit. After a certain time from the beginning of the process, the deposit will come into a steady growth state. In addition, an equation is provided to estimate the wall thickness of the deposit under the steady growth state based on the mass conservation. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/32071]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | D. M. Liu,J. Z. Zhao,M. S. Li. Modeling and experimental verification of tubular product formation during spray forming[J]. Transactions of Nonferrous Metals Society of China,2009,19(3):661-667. |
| APA | D. M. Liu,J. Z. Zhao,&M. S. Li.(2009).Modeling and experimental verification of tubular product formation during spray forming.Transactions of Nonferrous Metals Society of China,19(3),661-667. |
| MLA | D. M. Liu,et al."Modeling and experimental verification of tubular product formation during spray forming".Transactions of Nonferrous Metals Society of China 19.3(2009):661-667. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。