Preparation of TiAl(3)-Al composite coating by cold spraying
文献类型:期刊论文
作者 | L. Shen ; L. Y. Kong ; T. Y. Xiong ; H. Du ; T. F. Li |
刊名 | Transactions of Nonferrous Metals Society of China
![]() |
出版日期 | 2009 |
卷号 | 19期号:4页码:879-882 |
关键词 | cold spraying TiAl(3)-Al composite coating orthorhombic Ti(2)AlNb alloy high temperature oxidation ti2alnb alloys oxidation ti 800-degrees-c phase air |
ISSN号 | 1003-6326 |
中文摘要 | TiAl(3)-Al coating was deposited on orthorhombic Ti(2)AlNb alloy substrate by cold spraying with the mixture of pure Al and Ti as the feedstock powder at a fixed molar ratio of 3:1 when the spraying distance, gas temperature and gas pressure for the process were 10 mm, 250 degrees C and 1.8 MPa, respectively. The as-sprayed coating was then subjected to heat treatment at 630 degrees C in argon atmosphere for 5 h at a heating rate of 3 degrees C/min and an argon gas flow rate of 40 mL/min. The obtained TiAl(3)-Al composite coating is about 212 mu m with a density of 3.16 g/cm(3) and a porosity of 14.69% in general. The microhardness and bonding strength for the composite coating are HV525 and 27.12 MPa. |
原文出处 | |
公开日期 | 2012-04-13 |
源URL | [http://210.72.142.130/handle/321006/32267] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | L. Shen,L. Y. Kong,T. Y. Xiong,et al. Preparation of TiAl(3)-Al composite coating by cold spraying[J]. Transactions of Nonferrous Metals Society of China,2009,19(4):879-882. |
APA | L. Shen,L. Y. Kong,T. Y. Xiong,H. Du,&T. F. Li.(2009).Preparation of TiAl(3)-Al composite coating by cold spraying.Transactions of Nonferrous Metals Society of China,19(4),879-882. |
MLA | L. Shen,et al."Preparation of TiAl(3)-Al composite coating by cold spraying".Transactions of Nonferrous Metals Society of China 19.4(2009):879-882. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。