Friction stir welding of Zr(55)Cu(30)Al(10)Ni(5) bulk metallic glass to Al-Zn-Mg-Cu alloy
文献类型：期刊论文
| 作者 | D. Wang ; B. L. Xiao ; Z. Y. Ma ; H. F. Zhang |
| 刊名 | Scripta Materialia
 |
| 出版日期 | 2009 |
| 卷号 | 60期号:2页码:112-115 |
| 关键词 | Friction stir welding Metallic glasses Aluminum Fracture supercooled liquid zr55al10ni5cu30 alloy aluminum |
| ISSN号 | 1359-6462 |
| 中文摘要 | Zr(55)Cu(30)Al(10)Ni(5) bulk metallic glass (BMG) 1.7 mm thick and Al-Zn-Mg-Cu alloy plates were successfully joined by friction stir welding (FSW), producing defect-free BMG-Al joints. Some BMG particles were stirred into the aluminum side of the nugget zone; however, crystallization did not occur during FSW. No reaction layer was detected around the BMG particles and at the interface of two materials. The ultimate tensile strength (432 MPa) of the BMG-Al joint reached up to 74% of the base aluminum alloy. (C) 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/32343]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | D. Wang,B. L. Xiao,Z. Y. Ma,et al. Friction stir welding of Zr(55)Cu(30)Al(10)Ni(5) bulk metallic glass to Al-Zn-Mg-Cu alloy[J]. Scripta Materialia,2009,60(2):112-115. |
| APA | D. Wang,B. L. Xiao,Z. Y. Ma,&H. F. Zhang.(2009).Friction stir welding of Zr(55)Cu(30)Al(10)Ni(5) bulk metallic glass to Al-Zn-Mg-Cu alloy.Scripta Materialia,60(2),112-115. |
| MLA | D. Wang,et al."Friction stir welding of Zr(55)Cu(30)Al(10)Ni(5) bulk metallic glass to Al-Zn-Mg-Cu alloy".Scripta Materialia 60.2(2009):112-115. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。