PREPARATION OF BIOACTIVE FILM ON Ti6Al4V
文献类型：期刊论文
| 作者 | Q. Wang ; Y. Zhang ; K. Yang ; L. L. Tan |
| 刊名 | Surface Review and Letters
 |
| 出版日期 | 2009 |
| 卷号 | 16期号:5页码:775-779 |
| 关键词 | Ti6Al4V anodic oxidation SBF apatite chemically treated titanium apatite formation heat-treatment bond strength alloy nucleation magnesium phosphate coatings surface |
| ISSN号 | 0218-625X |
| 中文摘要 | Titanium oxide films were prepared using an anodic oxidation method in sulfuric acid solution on the surface of Ti6Al4V alloy at room temperature. The surface energy was obtained by the measurement of contact angles and the calculation with Owens-Wendt-Kaeble's equation. Ti6Al4V with anodic film after chemical treatment with NaOH aqueous solution showed excellent apatite-forming ability and produced a compact apatite layer covering all the surface of titanium after soaking in three times concentration (SBF x 3) for three days. A bioactive titania-CaP film was obtained on Ti6Al4V. Scanning electron microscopy, X-ray diffraction and Fourier Transform Infra-Red were used to analyze composition changes of the bioactive film. It is concluded that the acceleration of the apatite nucleation on the anodized Ti6Al4V with chemical treatment in a modified simulated body fluid was attributed to the novel surface characteristics and the formation of sodium titanate hydrogel layer during chemical pretreatment. The treatment of Ti6Al4V by anodic oxidation and subsequently in NaOH is a suitable method for providing the metal implant with bone-bonding ability. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/32370]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Q. Wang,Y. Zhang,K. Yang,et al. PREPARATION OF BIOACTIVE FILM ON Ti6Al4V[J]. Surface Review and Letters,2009,16(5):775-779. |
| APA | Q. Wang,Y. Zhang,K. Yang,&L. L. Tan.(2009).PREPARATION OF BIOACTIVE FILM ON Ti6Al4V.Surface Review and Letters,16(5),775-779. |
| MLA | Q. Wang,et al."PREPARATION OF BIOACTIVE FILM ON Ti6Al4V".Surface Review and Letters 16.5(2009):775-779. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。