Mesoscopic modeling of austenite static recrystallization in a low carbon steel using a coupled simulation method
文献类型:期刊论文
作者 | C. W. Zheng ; N. M. Xiao ; D. Z. Li ; Y. Y. Li |
刊名 | Computational Materials Science
![]() |
出版日期 | 2009 |
卷号 | 45期号:2页码:568-575 |
关键词 | Static recrystallization Cellular automaton Crystal plasticity finite element Stored deformation energy distribution cellular-automata model dynamic recrystallization microstructural evolution inhomogeneous deformation deformed metals stored energy kinetics polycrystals |
ISSN号 | 0927-0256 |
中文摘要 | This study presents a two-dimensional cellular automation (CA) simulation of austenite static recrystallization (SRX) following hot deformation by coupling with a crystal plasticity finite element (CPFEM) modeling. The initial deformed microstructure and the Spatial distribution of the stored deformation energy quantified by CPFEM were incorporated in the CA model as the input for the simulation of the subsequent SRX nucleation and grain growth. This modeling provides an insight into the influence of heterogeneous deformation on the subsequent SRX at the mesoscale. The influence of pre-deformation on the SRX microstructure evolution and the transformation kinetics are discussed for three deformation levels of epsilon = 0.3, 0.5, 0.8. (c) 2008 Elsevier B.V. All rights reserved. |
原文出处 | |
公开日期 | 2012-04-13 |
源URL | [http://210.72.142.130/handle/321006/32610] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | C. W. Zheng,N. M. Xiao,D. Z. Li,et al. Mesoscopic modeling of austenite static recrystallization in a low carbon steel using a coupled simulation method[J]. Computational Materials Science,2009,45(2):568-575. |
APA | C. W. Zheng,N. M. Xiao,D. Z. Li,&Y. Y. Li.(2009).Mesoscopic modeling of austenite static recrystallization in a low carbon steel using a coupled simulation method.Computational Materials Science,45(2),568-575. |
MLA | C. W. Zheng,et al."Mesoscopic modeling of austenite static recrystallization in a low carbon steel using a coupled simulation method".Computational Materials Science 45.2(2009):568-575. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。