Effects of incorporation of Si or Hf on the microstructure and mechanical properties of Ti-Al-N films prepared by arc ion plating (AIP)
文献类型：期刊论文
| 作者 | C. J. Feng ; S. L. Zhu ; M. S. Lie ; L. Xin ; F. H. Wang |
| 刊名 | Surface & Coatings Technology
 |
| 出版日期 | 2008 |
| 卷号 | 202期号:14页码:3257-3262 |
| 关键词 | Ti-Al-Si-N Ti-Al-Hf-N arc ion plating microstructure mechanical properties nanocomposite thin-films hybrid coating system high-speed steel oxidation behavior bias voltage sputtered ti superhard materials hard coatings cathodic arc deposition |
| ISSN号 | 0257-8972 |
| 中文摘要 | Ti-Al-N, Ti-Al-Si-N and Ti-Al-Hf-N films were deposited on 1Cr11Ni2W2MoV stainless steel by arc ion plating (AIP) with a Ti70Al30, a Ti60Al30Si10 and a Ti68Al30Hf2 cathode, respectively. The effects of Si or Hf addition on the composition, microstructure and mechanical properties of the Ti-Al-N films were investigated by EPMA, TEM, SEM, XRD, micro-hardness and wear tests. The results show that all the deposited films possessed B1 structure. With the incorporation of Si or Hf, the texture of Ti-Al-N films remarkably changed from preferred orientation of (220) to mixture broadened orientations of (111), (200) and (220), the mean crystallite size of Ti-Al-N decreased from similar to 90 nmr to similar to 30 and similar to 15 nm and no peaks of crystalline Si3N4 were detected from XRD analyses. Due to the addition of Si or HE, the micro-hardness of Ti-Al-N films increased remarkably from 23.5 Gpa to 33.6 or 29.5 GPa, and the wear resistance was also enhanced. The effects of incorporation of Si or Hf on the microstructure and mechanical properties of Ti-Al-N films are discussed. (c) 2007 Elsevier B.V. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/32750]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | C. J. Feng,S. L. Zhu,M. S. Lie,et al. Effects of incorporation of Si or Hf on the microstructure and mechanical properties of Ti-Al-N films prepared by arc ion plating (AIP)[J]. Surface & Coatings Technology,2008,202(14):3257-3262. |
| APA | C. J. Feng,S. L. Zhu,M. S. Lie,L. Xin,&F. H. Wang.(2008).Effects of incorporation of Si or Hf on the microstructure and mechanical properties of Ti-Al-N films prepared by arc ion plating (AIP).Surface & Coatings Technology,202(14),3257-3262. |
| MLA | C. J. Feng,et al."Effects of incorporation of Si or Hf on the microstructure and mechanical properties of Ti-Al-N films prepared by arc ion plating (AIP)".Surface & Coatings Technology 202.14(2008):3257-3262. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。