Material removal and surface damage in EDM of Ti3SiC2 ceramic
文献类型：期刊论文
| 作者 | C. F. Hu ; Y. C. Zhou ; Y. W. Bao |
| 刊名 | Ceramics International
 |
| 出版日期 | 2008 |
| 卷号 | 34期号:3页码:537-541 |
| 关键词 | surfaces strength Ti3SiC2 electrical discharge machining discharge machining process theoretical-models contact damage erosion model microstructure deformation oxidation composite strength behavior |
| ISSN号 | 0272-8842 |
| 中文摘要 | Material removal and surface damage of Ti3SiC2 ceramic during electrical discharge machining (EDM) were investigated. Melting and decomposition were found to be the main material removal mechanisms during the machining process. Material removal rate was enhanced acceleratively with increasing discharge current, i(e), working voltage, u(i), but increased deceleratively with pulse duration, t(e). Microcracks in the surface and loose grains in the subsurface resulted from thermal shock were confirmed, and the surface damage in Ti3SiC2 ceramic led to a degradation of both strength and reliability. (C) 2007 Elsevier Ltd and Techna Group S.r.l. All rights reserved. |
| 原文出处 | |
| 公开日期 | 2012-04-13 |
| 源URL | [http://210.72.142.130/handle/321006/32817]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | C. F. Hu,Y. C. Zhou,Y. W. Bao. Material removal and surface damage in EDM of Ti3SiC2 ceramic[J]. Ceramics International,2008,34(3):537-541. |
| APA | C. F. Hu,Y. C. Zhou,&Y. W. Bao.(2008).Material removal and surface damage in EDM of Ti3SiC2 ceramic.Ceramics International,34(3),537-541. |
| MLA | C. F. Hu,et al."Material removal and surface damage in EDM of Ti3SiC2 ceramic".Ceramics International 34.3(2008):537-541. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。