High temperature corrosion behavior of a multilayer CrAlN coating prepared by magnetron sputtering method on a K38G alloy
文献类型:期刊论文
作者 | T. P. Li ; Y. C. Zhou ; M. S. Li ; Z. P. Li |
刊名 | Surface & Coatings Technology |
出版日期 | 2008 |
卷号 | 202期号:10页码:1985-1993 |
ISSN号 | 0257-8972 |
关键词 | multilayer coating oxidation hot corrosion magnetron sputtering thermal barrier coatings oxidation resistance cyclic oxidation microstructural development diffusion coatings hot corrosion super-alloys fused na2so4 bond-coat solubilities |
中文摘要 | A multilayer CrAlN coating of Cr0.58Al0.42N/Cr0.84Al0.16N/Cr0.51Al0.49N has been fabricated by a reactive magnetron sputtering method. It consists of a bonding layer, a Cr-rich intermediate layer and an Al-rich outer layer. The multilayer structure provides the coating with good protection against different types of high temperature corrosion, i.e., high temperature oxidation and hot corrosion. The outer Al-rich layer gives the coating good oxidation resistance at 1000 and 1100 degrees C due to the formation of a continuous alumina scale. The parabolic rate constants of the coated samples decrease by about 2 orders of magnitude compared with that of the bare alloy samples. The intermediate Cr-rich layer can form a Cr2O3 scale to provide good protection under the,hot corrosion conditions in the Na2SO4 salt fluxing at 900, 950 and 1000 degrees C. The incubation period of the hot corrosion extends several times longer when the alloy was coated by the multilayer coating at the three selected temperatures. (c) 2007 Elsevier B.V. All rights reserved. |
原文出处 | |
公开日期 | 2012-04-13 |
源URL | [http://210.72.142.130/handle/321006/32896] |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | T. P. Li,Y. C. Zhou,M. S. Li,et al. High temperature corrosion behavior of a multilayer CrAlN coating prepared by magnetron sputtering method on a K38G alloy[J]. Surface & Coatings Technology,2008,202(10):1985-1993. |
APA | T. P. Li,Y. C. Zhou,M. S. Li,&Z. P. Li.(2008).High temperature corrosion behavior of a multilayer CrAlN coating prepared by magnetron sputtering method on a K38G alloy.Surface & Coatings Technology,202(10),1985-1993. |
MLA | T. P. Li,et al."High temperature corrosion behavior of a multilayer CrAlN coating prepared by magnetron sputtering method on a K38G alloy".Surface & Coatings Technology 202.10(2008):1985-1993. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。